If you have a Husqvarna Viking sewing machine, then you know that the cam lock is an important part of the machine. This component helps hold the presser foot in place while sewing. If the cam lock becomes damaged or worn out, it’s important to replace it as soon as possible. This tutorial will show you how to replace a Husqvarna Viking cam lock. Keep reading for step-by-step instructions!
What Causes a Husqvarna Viking Cam Lock to Become Damaged?
There are a few different things that can cause a Husqvarna Viking cam lock to become damaged. One of the most common causes is simply wearing and tear. Over time, the cam lock can become worn down, making it less effective at holding the presser foot in place.
Another common cause of damage to the cam lock is sewing over thick fabrics. If you try to sew over a thick fabric without adjusting the tension, you can end up putting too much pressure on the cam lock. This can cause it to become damaged or even broken. Additionally, if you use your sewing machine for quilting, you may also damage the cam lock. Quilting requires a lot of movement back and forth, which can put stress on the cam lock and cause it to break.
The other major cause of damage to the cam lock is improper storage. If you store your sewing machine in a humid environment, the moisture can cause the cam lock to rust. Finally, if you drop your sewing machine, the cam lock can become damaged.
Why It’s Important to Replace a Damaged Cam Lock
It’s important to replace a damaged cam lock for several reasons. First, a damaged cam lock can cause the door to become misaligned, making it difficult to close or open. Additionally, a damaged cam lock may no longer provide the level of security needed to protect your home or business. Another reason to replace a damaged cam lock is to prevent potential damage to the door itself.
When a cam lock is damaged, it can cause the door to become unlevel, which can put stress on the hinges and potentially cause the door to warp.
Finally, replacing a damaged cam lock will restore the aesthetic appeal of your door. A damaged cam lock can make your door look old and worn, which can detract from the curb appeal of your home or business.
Some Easy Ways How to Replace a Husqvarna Viking Cam Lock
1. Inspect the Cam Lock
The first step is to inspect the cam lock to see if it’s damaged. Look for any cracks, chips, or other signs of damage. If the cam lock is damaged, it’s important to replace it as soon as possible. Next, inspect the entire cam lock, including the body, the housing, and the locking mechanism. If any part of the cam lock is damaged, it must be replaced.
2. Use a Screwdriver
Once you’ve identified the damaged cam lock, use a screwdriver to remove it from the door. Be sure to remove any screws or bolts that are holding the cam lock in place. If the cam lock is damaged, it may be difficult to remove. First, try to unscrew it by hand. If the cam lock is stuck, you may need to use a power drill to remove it. Then, use a screwdriver to pry the cam lockout of the door. If the cam lock is still stuck, you may need to use a hammer to tap it out of the door gently.
3. Use Needle Nose Pliers
If the cam lock is still stuck, you can try using needle nose pliers. This is a common household tool that can be found at most hardware stores. First, identify which direction the cam lock is facing. Once you know this, insert the needle nose pliers into the small space between the lock’s body and the cam.
Apply pressure to the pliers in the direction that the cam is facing. This should loosen the cam lock enough for you to remove it. Avoid using too much force, as this can damage the machine.
4. Use Vice Grips
If the cam lock is still stuck, you can try using vice grips. This is a more heavy-duty option and should only be used if the other methods haven’t worked. Place the vice grips on the cam lock and turn clockwise. This should loosen the lock. If it still doesn’t budge, you can try hitting the vice grips with a hammer to jar it loose. Be careful not to damage the cam lock with the vice grips or hammer.
5. Use a Hammer
If the cam lock is still stuck, you can try using a hammer. It would help if you used a rubber or nylon hammer so you don’t damage the machine. If you have one, you can also try using a small piece of wood to tap on the cam lock. Use a medium to large-sized hammer to strike the cam lock. First, tap the cam lock gently to see if it will budge.
If it doesn’t, you can try hitting it harder. Be careful not to hit it too hard, as you could damage the machine. If the cam lock still doesn’t budge, you can try using a bigger hammer.
6. Use a Chisel
If the cam lock is still stuck, you can try using a chisel. Be very careful when using a chisel, as you don’t want to damage the surrounding area. First, use a sharp chisel to score around the perimeter of the cam lock. Next, tap the chisel around the scored area using a hammer until the cam lock pops out. Avoid using too much force, as this could damage the machine.
7. Use a Drill
You can also try using a drill to remove the cam lock. This will require a little more effort, but it’s worth a try if the other methods don’t work. First, remove the cam lock from the sewing machine. Then, find a drill bit that is the same size as the cam lock. Next, put the drill bit into the chuck of the drill and tighten it. Now, put the drill bit into the cam lock.
Apply pressure and turn the drill on. The goal is to apply enough pressure to the cam lock so that it breaks. Once the drill has broken the cam lock, please remove it from the machine.
8. Use an Impact Driver
If you have an impact driver, you can try using it to remove the cam lock. This is a more heavy-duty tool, so it may be able to loosen the lock more effectively. Be careful when using an impact driver, as they can be dangerous if used improperly. First, ensure that the impact driver is properly secured to the cam lock.
Then, turn on the impact driver and let it run for a few seconds before using it on the lock. Apply pressure to the lock with the impact driver and see if it will loosen. If it does not, continue trying until it does. Once the lock is loose, please remove it from the machine.
9. Use a Dremel Tool
If you have a Dremel tool, you can try using it to remove the cam lock. This is a very powerful tool, so you need to be careful when using it. It would be best if you also had the proper attachments for the Dremel tool. First, you need to find the bit that will fit over the cam lock. Once you have found the right bit, please attach it to the Dremel tool. Next, you need to put on safety glasses and a dust mask.
Please turn on the Dremel tool and hold it over the cam lock. You will need to apply pressure to the Dremel tool as you are moving it around the cam lock. The goal is to grind away the lock’s metal until it is completely removed. This process will create a lot of dust, so make sure you are in a well-ventilated area.
Tips and Warnings on How to Replace a Husqvarna Viking Cam Lock
Tips:
- Be sure to purchase the correct replacement cam lock for your model of Husqvarna Viking sewing machine.
- To avoid stripping the screws, use the correct size screwdriver when removing and replacing the cam lock.
- Be sure that the new cam lock is screwed in tightly to avoid Sewing Machine Problems later on.
Warnings:
- Do not use a hammer to remove the old cam lock, as this could damage your sewing machine.
- Be careful not to lose any of the small screws or other parts when removing the old cam lock.
- Make sure that the new cam lock is screwed in tightly enough so that it does not come loose and cause Sewing Machine Problems.
Conclusion
So there you have everything you need to know on How to Replace a Husqvarna Viking Cam Lock. Follow the tips and warnings above to avoid damaging your sewing machine. If you have any other questions, feel free to ask in the comments below. Thanks for reading!