How to Fix a Deadbolt Lock That Spins

Have you ever had a deadbolt lock that just wouldn’t turn? It can be incredibly frustrating, especially if you’re in a hurry. Luckily, there are a few things you can do to try and fix the problem. In this blog post, we’ll walk you through three of the most common methods. Keep reading to learn more!

How to Fix a Deadbolt Lock That Spins

A deadbolt lock that won’t turn is a common problem, but it can be fixed relatively easily. In this blog post, we’ll teach you how to fix a deadbolt lock that spins, so you can get back into your home or office quickly and easily. We’ll also discuss some of the potential causes of this problem, so you can troubleshoot it in the future. 

What Causes Spins in a Deadbolt Lock?

There are many possible causes of spins in a deadbolt lock. Such as:

1. Damaged Internal Parts

One of the most common reasons for a deadbolt lock to spin is damage to the internal components of the lock, such as the springs or other moving parts. These can become worn over time due to frequent use or may be damaged by physical impact from outside forces.

2. Incorrect Installation

Another common cause of spins in a deadbolt lock is incorrect installation. If the sides of the lock are not aligned properly when inserted into the door, this can lead to problems with operation and may cause damage to the internal pieces over time.

3. Misaligned Door

In some cases, a deadbolt lock may spin simply due to the fact that the door itself is not properly aligned with the rest of the frame. This may be due to warping or settling over time, or it could be caused by other issues such as poor installation or damage from outside forces.

10 Methods About How to Fix a Deadbolt Lock That Spins

1. Tight the Screws of the Deadbolt Lock

The most common cause of a spinning deadbolt lock is that the screws that hold it in place are loose. To fix this issue, simply tighten the screws and see if your deadbolt stops spinning. Also, make sure to check the screws on the strike plate, as well as those on your door itself.

Tighten the Screws

2. Remove Debris from Inside and Outside of Lock Housing

If dirt, dust, or other debris has accumulated around or inside your lock, this can cause it to spin freely when you try to turn the key. To clear out these obstructions, carefully remove your deadbolt lock from the door and thoroughly clean it with a damp cloth.

3. Remove Stuck or Broken Keys From Lock Housing

If you have been attempting to turn your key in the deadbolt lock over and over again in an attempt to open the door, this can sometimes cause keys to become stuck or broken. Before replacing your lock, try carefully removing the broken key pieces from inside the lock housing.

4. Check for Loose or Damaged Strike Plates

Another possible cause of a spinning deadbolt lock is that the strike plate may not be securely attached to your door or frame. If this is the case, simply tighten any loose screws and make sure that your strike plate aligns with the latch on your deadbolt lock.

5. Use Lubricant to Keep Parts Moving Smoothly

If debris and dirt are not the sources of your spinning deadbolt lock issue, it may be due to friction and other mechanical issues. To help resolve this, try lubricating all moving parts of the lock with a thin coat of silicone-based lubricant.

6. Replace the Lock Mechanism

After trying other possible fixes, if your deadbolt lock continues to spin, you may need to replace the entire lock mechanism altogether. This is a more time-consuming and expensive option than other fixes, but it will ensure that your door is properly secured and free from future spinning issues.

7. Replace Your Deadbolt Lock

One last possible solution to your spinning deadbolt lock issue is simply to replace the entire lock altogether. While this can be a costly and time-consuming process, it may be your only option if you are unable to find a solution that works for you through other methods.

8. Contact a Locksmith

If all else fails, you may also want to consider contacting a professional locksmith for assistance. A locksmith can examine your lock, identify the source of the spinning issue, and provide you with a permanent fix that will keep your door secure and free from future problems.

Consider Contacting a Professional Locksmith

9. Consider Upgrading to a Smart Lock

You can also consider upgrading to a smart lock if you are looking for a long-term solution to your spinning deadbolt lock issue. Smart locks provide additional security features, such as keypad entry or smartphone access, and can help prevent future problems with your door hardware.

10. Consider Installing New Door Hardware

Finally, if your spinning deadbolt lock issue is caused by an old or outdated lock, you may want to consider installing new door hardware altogether. This can be a major renovation project, but it will ensure that your door is properly secured and free from future problems with your deadbolt lock.

Precautions You Must Take While Fixing a Deadbolt Lock That Spins

1. Do Not Force

When you are working on a deadbolt lock that seems to be spinning, it is important to take care not to force anything and cause more damage. If the key is turning too easily or not at all, try gently wiggling it back and forth in order to loosen any potential obstructions.

2. Check the Latch

Sometimes a spinning deadbolt lock is simply a result of a faulty latch. Check to see if the latch is lined up properly and functioning correctly, and adjust as necessary. Also make sure that the latch is strong and durable enough to support the weight of the door.

3. Clean and Oil the Lock

In many cases, a spinning deadbolt lock can be fixed simply by cleaning and oiling it. Use a fine-tipped brush or small cloth to remove any dirt, debris, or grime that may have accumulated inside the lock. Next, apply a thin layer of lubricant or oil to the inside of the lock and to all moving parts. This should help solve any mechanical issues that are causing your deadbolt to spin.

4. Check the Door and Frame

If your deadbolt is spinning but still functioning correctly, there may be an issue with the surrounding door or frame. Make sure that the door itself is properly aligned and securely fastened to the frame and that there are no cracks, chips, or other damage that could be causing undue stress on the lock mechanism.

May Be an Issue With the Surrounding

Frequently Asked Questions

How Do You Know if Your Deadbolt Lock is Spinning?

The most common sign that a deadbolt lock is spinning is if the key or handle feels loose or wobbly when you try to turn it. Additionally, some signs of a spinning deadbolt lock may include loud clicking noises when you try to turn the key, as well as a feeling that the key is not really catching and unlocking the door.

How Much Time Does It Take to Fix a Spinning Deadbolt Lock?

There is no set amount of time that it will take to fix a spinning deadbolt lock, as this will depend on the exact cause of the issue. In some cases, you may be able to fix the problem yourself by simply tightening any loose screws or replacing any worn-out parts. However, in other cases, you may need to take your lock in for professional repair or replacement.

How Can You Prevent a Spinning Deadbolt Lock?

There are a few things you can do to help prevent your deadbolt lock from spinning, including regularly checking and tightening the screws on your lock, lubricating and cleaning any moving parts, and replacing any worn-out parts or locks as needed.

Replacing Any Worn-out Parts or Locks

Additionally, some deadbolt locks come with additional features like key cylinder protection or anti-drill plates to help prevent excessive wear and damage that can lead to spinning.

Conclusion

Hopefully, this article was able to help you figure out how to fix a deadbolt lock that spins. It’s a pretty simple process that just about anyone can do with the right tools. Be sure to take your time and be careful not to strip any screws. With a little patience, you should be able to have your lock working like new in no time!

A deadbolt that spins is a very common problem and one that is relatively easy to fix. With just a few minutes and some basic tools, you can have your deadbolt working correctly again. If you’re not comfortable making the repairs yourself, or if you want someone to take a look at it to make sure it’s safe, be sure to call a locksmith or handyman.

Leave a Comment