Knowing how to bypass a magnetic door lock can be invaluable in many situations. Whether you find yourself locked out of your home or office and need an emergency entry, or are looking for ways to increase security at either location, this knowledge could come in handy at any time.
In this blog post, we’ll be discussing the different methods available for bypassing a magnetic door lock, the benefits of doing so, and the materials needed to accomplish it.
Additionally, readers will learn why employing professionals may be their best course of action when taking on this task. With a better understanding of magnetic door locks and proper installation techniques after reading this article on how to bypass magnetic door lock, everyone from homeowners to security consultants can benefit alike.
What is a Magnetic Door?
A magnetic door lock is an electronic security device made up of two components: the receiver, which is mounted to the door frame or wall, and the emitter, which is placed on the other side of the door. When these two components are in close proximity with each other and match up correctly, they emit a magnetic energy that holds the door shut securely.
Benefits of Bypassing Magnetic Door Lock
Bypassing a magnetic door lock can be beneficial in several ways. For one, it allows for emergency entry when you find yourself locked out of your home or office. Additionally, it can provide an additional layer of security by allowing you to bypass the keypad entry and prevent unauthorized access to the building. Lastly, it can help you save time by bypassing lengthy locksmith procedures.
Bypassing a magnetic door lock requires several items: a hacksaw, a screwdriver set, a hammer or mallet, and the correct magnets. To bypass the magnetic door lock, you will need to cut into the door frame and then use a hammer or mallet to place the correct magnets on either side of the door. This will cause the receiver and emitter components to match up correctly and provide an emergency entry point.
10 Easy Step-by-step Guide on How to Bypass Magnetic Door Lock
Step 1: Turn off the Power
The first step in bypassing a magnetic door lock is to turn off the power going to the door lock. This will ensure that no electricity is flowing through the device while you work on it and reduce the risk of injury.
It is important to make sure the power is completely off before proceeding. But it is also important to note that turning off the power will disable any alarm system connected to the lock.
Step 2: Remove the Cover Plate
Once the power to the door lock has been turned off, locate and remove the cover plate on the magnetic door lock. This will expose the emitter and receiver components of the device. If necessary, use a screwdriver to remove the screws from the cover plate. You may need to use a hacksaw to cut through the door frame if necessary.
Step 3: Disconnect Wires
Using a screwdriver set, carefully disconnect any wires connecting to either component of the magnetic door lock. Be sure not to lose any screws while doing this step. It is also important to make sure that no wires are still connected when moving on to the next step. Make sure not to touch any wires or exposed metal as this may cause an electric shock.
Step 4: Use a Hacksaw
Take a hacksaw and carefully cut it into both sides of the door frame where the emitter and receiver components are located. This will create an opening big enough for you to place magnets on either side of the door. If necessary, you can use a hammer or mallet to help create an opening. Be sure not to cause any damage to the door frame during this process.
Step 5: Place Magnets
Using a hammer or mallet, place the correct magnets on either side of the door. Make sure to line them up properly so that they will create an electromagnetic field when in close proximity to each other.
Then, secure them in place by using a screwdriver or tool. It is important to make sure the magnets are placed correctly and that they are not too close or too far away from each other.
Step 6: Reconnect Wires
Once you have placed the magnets, carefully reconnect any wires you previously disconnected from the magnetic door lock components. Make sure all screws are tightened securely and there are no exposed wires. If necessary, you can use electrical tape to cover any exposed wires. However, it is important to make sure that all wires are connected properly and securely before proceeding.
Step 7: Test Out the Lock
Test out your work by pushing against the door to check if it is locked. If it is still locked, repeat steps 3-6 until successful. Be sure to check the magnets are aligned properly and securely in place. If it is unlocked, you have successfully bypassed the magnetic door lock. Otherwise, you may need to try a different type of magnet.
Step 8: Secure the Cover Plate
Once you successfully bypassed the magnetic door lock, secure the cover plate back into place. Make sure all screws are tightened securely and there are no gaps between the door frame and cover plate. It is important to make sure the cover plate is secure and not loose as this may cause a security issue.
Step 9: Turn on the Power
Turn on the power going to the door lock. This will ensure that when someone tries to use their key or code to open it, the system will still function properly. If you had previously disabled an alarm system while disconnecting the wires, make sure to turn it on before finishing up. After having done all the steps above, you have successfully bypassed a magnetic door lock.
Step 10: Test Out the Lock Again
Test out your work again by pushing against the door to check if it is locked. If successful, you have successfully bypassed a magnetic door lock! Try it out several times to make sure the door locks and unlocks properly. If you encounter any issues, check each step to make sure everything was done correctly.
By following these steps, anyone can learn how to bypass magnetic door lock and gain access to a building in an emergency. Additionally, this method of bypassing a magnetic door lock can help provide an additional layer of security for buildings against unauthorized entry attempts.
Other than the materials listed above, there are no specialized tools or skills required for performing this process. Just make sure to double check each step before moving on to the next one! With careful preparation, anyone can learn how to bypass a magnetic door lock securely and effectively.
Why Employ Professionals?
Although it is possible to bypass a magnetic door lock yourself, employing professionals may be your best course of action. Professionals have the experience and specialized knowledge required for this task and can ensure that the installation is done correctly and safely. They will also be able to provide advice on how to increase security at your home or office with this type of setup, as well as answer any questions you may have about the process.
Bypassing a magnetic door lock is not an impossible task. With the right materials and knowledge, it can be done quickly and securely. However, for the best results, seeking professional help is always recommended. After reading this blog post on how to bypass a magnetic door lock, homeowners and security consultants alike can benefit from this knowledge to increase their safety and convenience.
Frequently Asked Questions
Q: Is It Possible to Bypass a Magnetic Door Lock Without the Correct Magnets?
A: No, in order for the receiver and emitter components to match up correctly, you will need to have the correct magnets in place. Without them, the door will not stay shut securely.
Q: How Much Does It Cost to Have a Professional Bypass a Magnetic Door Lock?
A: The cost of this service will depend on the size and complexity of the project, as well as how much time it takes for the professional to complete it. Generally speaking, you can expect to pay anywhere from $50 to $150 for this service.
Q: Are Magnetic Door Locks Commonly Used?
A: Yes, magnetic door locks are becoming increasingly popular as they provide an additional layer of security that is both secure and convenient. Additionally, they are easy to install and require minimal maintenance.
Q: How Long Does It Take to Bypass a Magnetic Door Lock?
A: The amount of time it takes to bypass a magnetic door lock will depend on the complexity of the setup, as well as the skill level of the person performing the installation. On average, this process should take no more than an hour for most setups.
Furthermore, a magnetic door lock is an efficient access control system for virtually any doorway. Its sleek and modern design makes it ideal for businesses that want to secure their entranceway with minimal visibility. Unfortunately, many people are unaware of the secrets behind them.
However, with a bit of creativity and an understanding of how they operate, anyone can learn how to bypass these locks in record time. Knowing this information on how to bypass magnetic door lock can come in handy when attempting to enter a locked building or room without access to the key card or code required by the lock.
Remember that while you shouldn’t break any laws while trying to gain access, if you are ever in an emergency situation then knowing how to bypass a magnetic door lock may be invaluable. All in all, staying informed on ways like these makes life much easier when an unexpected lockout occurs.