How to Install Ring Camera on Stucco Without Drilling

Are you looking for an easier way to install your ring camera onto a stucco surface? Maybe you’re wondering if there’s an alternative to drilling holes in the walls of your home and creating messes everywhere. If so, then this blog post is going to be just what you need!

How to Install Ring Camera on Stucco Without Drilling

Below, we’ll provide step-by-step instructions on how to install Ring Camera on stucco without drilling any holes or creating excessive mess. Whether it’s for security or peace of mind, installing your Ring cameras without damaging your brickwork will help keep both sides happy – everyone can stay safe and sound with no damage done!

Tools and Materials You Will Need to Install Rink Camera on Stucco Without Drilling

  1. A high-quality mounting tape
  2. A measuring tape
  3. Pencil or pen for marking where the camera will be placed
  4. Ruler (optional)
  5. Ladder or step stool (if necessary)

Step by Step Guidelines on How to Install Ring Camera on Stucco Without Drilling

Step 1: Measure and Mark the Spot for Your Ring Camera Installation

Before you begin, make sure to measure the area where you plan to install the camera. It’s important to ensure that you have a level of accuracy when doing this so be sure to use a measuring tape and/or ruler. Once you’ve identified the spot, go ahead and mark it with a pencil or pen. Measuring twice and cutting once is always a good rule of thumb here!

Step 2: Attach Mounting Tape to the Back of Your Ring Camera

Next, you’ll need to attach the mounting tape that comes with your camera to the back. Make sure that it’s secure and won’t come off easily – otherwise, this will affect how your ring camera works. While attaching the mounting tape, be sure to keep an eye on where you marked.

Step 3: Apply the Mounting Tape to Stucco Surface

Once your mounting tape is secure, you can then apply it to the stucco surface. Start by peeling off a few inches of the backing paper and press the adhesive side onto the wall in the spot that you marked out earlier. Be sure to press firmly so that it stays in place and doesn’t move around. In this step, it’s also important to make sure that the mounting tape is firmly attached and won’t come off easily.

Step 4: Secure Your Ring Camera onto the Stucco Surface

At this point, you can now secure your Ring camera to the stucco surface. Line it up with where you marked out earlier and press down firmly on the mounting tape. After that’s done, make sure to double-check that everything is lined up correctly and securely installed. Carefully inspect the camera and mounting tape to make sure it will stay in place.

Secure Your Ring Camera to the Stucco Surface

And there you have it – your Ring camera is now successfully installed on the stucco without drilling any holes or creating a mess. Now, all you need to do is plug in the power cord and start using your new security device! Thank you for reading our blog post and we hope that this was helpful!

Additional Tips and Tricks to Install Ring Camera on Stucco Without Drilling

  1. Choose a flat, even surface for your camera. Stucco can be uneven in places, so it’s important to make sure the surface you choose is as level and smooth as possible.
  2. Use mounting tape or putty to help secure the camera. This type of adhesive won’t leave residue on the stucco when removed and can provide extra stability.
  3. Clean the area before mounting your camera. Make sure to wipe down the surface with a damp cloth and allow it to dry completely before attempting to attach your camera.
  4. Create a template or pattern for greater accuracy when drilling holes in stucco. This will make it easier to ensure that the holes you drill are accurately placed on the stucco.
  5. When drilling into stucco, use a low-speed setting to reduce the chances of cracking the material. Also be sure to wear safety goggles and a dust mask when drilling, as this will help protect your eyes and lungs from debris.
  6. Finally, make sure you measure twice and drill once! Before mounting your camera, double-check all measurements and make sure it’s mounted securely. This will help ensure that your Ring camera is installed correctly on stucco.
Wear Safety Goggles and a Dust Mask

By following these tips and tricks, you can successfully install your Ring camera on stucco without having to drill into the material. With a little bit of patience and careful preparation, you’ll be able to mount your camera securely and enjoy the convenience of home security at your fingertips!

Things You Should Consider to Install Ring Camera on Stucco Without Drilling

1. Choose a Mounting Method:

You will need to decide whether you want to use adhesive foam tape, double-sided mounting tape, or other methods to install your Ring camera on stucco without drilling. Be sure you know the weight limits of the method you choose and how much stress it can handle over time. Choosing the right mounting method is important to ensure a reliable and secure installation.

2. Check for Interference:

Make sure you check for any interference from nearby power lines or other sources of radio-frequency radiation before installing your Ring camera. This can affect the performance and reliability of your device, so make sure it’s clear of any potential interference. This will also help prevent any damage to the camera itself.

3. Select a Suitable Location:

Choose a suitable location for your Ring camera where it has an unobstructed view of the area you want to monitor. It’s best to avoid locations that are exposed to direct sunlight or wind as this can cause the device to overheat and malfunction. Also, make sure there is sufficient space around the camera for mounting and airflow.

4. Prepare the Surface:

Before applying adhesive to secure your Ring camera, make sure to clean the surface with a damp cloth to remove any dust or debris. Also, use a leveler or ruler to draw straight lines where you want to attach the camera before proceeding with the installation. This will ensure an even and accurate placement of your device.

5. Install the Camera:

Once you have chosen the mounting method and prepared the surface, it’s time to install your Ring camera. Be sure to follow all manufacturer instructions for installation carefully to ensure a secure connection. Use a leveler or ruler again to make sure everything is perfectly aligned before fully attaching it in place.

Use a Leveler or Ruler

6. Test the Camera:

Once your Ring camera is securely installed, be sure to test it out to make sure it’s working properly. Check the visuals and audio quality, as well as any motion detection settings you may have enabled. This will help ensure that your camera is functioning correctly and capturing all the footage you need.

With the following considerations, you can install your Ring camera on stucco without drilling. This will provide a secure and reliable installation for your device while protecting the surface from any potential damage. Follow these simple steps to make sure you have installed your camera correctly and are ready to start monitoring your home or business.

Precautions Need to Follow for Installing Ring Cameras on Stucco Without Drilling

  1. Take note of where you will be attaching your camera. Make sure the area is free from obstructions and won’t interfere with the field of view or operation of the camera’s motion sensors. Also, make sure it’s well hidden from prying eyes, as Ring cameras are very visible to a passerby.
  2. Before you even begin, make sure you have the right tools for the job. A good quality mounting tape should be used to help secure your camera in place. Make sure the tape is strong enough to hold the weight of the Ring camera and that it’s rated for outdoor use.
  3. Before attaching the camera, clean the area where you will be sticking it with an alcohol wipe to remove any debris and dirt. This will help the mounting tape adhere better and hold up for longer.
  4. Once you’re ready to attach the camera, carefully peel away the backing of the mounting tape and press it firmly against the stucco wall where you’ll be placing your Ring camera. Stick it in place and give it a few minutes to fully adhere.
  5. When you’re sure the tape has adhered properly, carefully place your Ring camera onto the mounting tape and press it firmly against the stucco wall. Make sure all of the components are securely placed before continuing with the installation process.
  6. Finally, connect your Ring camera to power and follow the instructions on the app to complete the setup. After installation is complete, test the camera to ensure it’s working properly and adjust the angle as needed to get your desired field of view.

By following these steps, you can easily install Ring cameras on stucco surfaces without drilling holes in the wall. Be sure to take all necessary precautions and use outdoor-rated mounting tape for best results. Taking the time to do the job right will help ensure your Ring camera is securely in place and working properly.

 Connect Your Ring Camera to Power

Frequently Asked Questions

Is It Possible to Install a Ring Camera on Stucco Without Drilling? 

Yes! Installing a Ring Camera on stucco is certainly possible, and there are several ways to do it. One option is to use adhesive mounting products such as Command strips or 3M VHB tape. These products can be used to securely attach the camera to the stucco without causing any damage.

Another option is to use specialized brackets that allow you to mount the camera without drilling. There are even options for mounting your Ring Camera on a window frame or other stationary object around your home.

Will My Ring Camera Stay Securely Attached?

Yes! Adhesive products such as Command strips and 3M VHB tape have been designed to adhere securely and stay put, even in extreme weather conditions. Additionally, specialized brackets are made with heavy-duty materials that can withstand the outdoor elements. As long as you follow the manufacturer’s instructions for installation, your Ring Camera will remain securely attached.

Will I Damage My Stucco When Installing a Ring Camera?

No! You won’t have to worry about damaging your stucco when installing a Ring Camera. Adhesive mounting products and specialized brackets offer a non-invasive way to mount your camera that won’t leave any marks or damage to the surface of the stucco. Additionally, many products are designed with materials that won’t corrode or deteriorate over time.

Damaging Your Stucco When Installing a Ring Camera


Ultimately, knowing how to properly install a Ring camera on stucco without drilling can save you time and money. You’ll no longer need professional help, making this an easy DIY project. Additionally, installation is quicker and simpler without the need for complex tools. Now that you’ve seen what materials are needed and the steps required to successfully complete this task, why not give it a try?

With the right guidance and direction, anyone with basic knowledge of security cameras should be able to get the job done quickly and easily. Plus with a professional-grade finish that will look great for years to come, you can’t go wrong! So don’t wait any longer – take your next step towards keeping your home safe by learning How to Install Ring Camera on Stucco Without Drilling today!

Leave a Comment