How to Permanently Bypass Honeywell Alarm Zone

An old Honeywell Alarm system that no longer works or is too expensive to replace can be both inconvenient and costly. One solution is permanently bypassing the alarm zone, disabling any detection, and ensuring that your home or business remains secure without breaking the bank.

The main advantage of permanently bypassing a Honeywell alarm zone is that it eliminates the need for manual resetting. 

How to Permanently Bypass Honeywell Alarm Zone

Instead, when an alarm is triggered, the system will automatically bypass the affected area until it can be cleared and reset. This makes the process much more convenient and efficient, as users won’t have to reset each time an alarm is triggered manually. Bypassing a Honeywell alarm zone also ensures that the system remains secure in the event of an emergency or false alarm. You can find step-by-step instructions on how to permanently bypass honeywell alarm zone in this blog article.

What Steps Should You Take Before Bypassing a Honeywell Alarm Zone?

  • Identify the zone you want to bypass and locate the zone’s corresponding terminal strip on your Honeywell alarm system.
  • Make sure all power to the system is switched off. Ensure that no one else has access to the control panel while you’re making changes.
  • Disconnect the sensor or device from the zone’s terminal strip.
  • Connect a shorting bar to the zone’s terminal strip. This will create a bypass, allowing you to continue using your alarm system without worrying about that particular zone being activated.
  • Once the shorting bar is in place, turn the power back on. Your system should now be bypassed.
  • Test the alarm system to ensure that any other triggers, such as vibration or motion sensors, no longer activate the zone you bypassed.
  • When your Honeywell alarm system has been tested and verified, it’s safe to reconnect the sensor or device to the terminal strip.
  • Ensure that the alarm system is working properly and that all other zones are functioning correctly. Once you’ve verified that everything is in order, your zone has been permanently bypassed.

Step-by-Step Instructions for How to Permanently Bypass Honeywell Alarm Zone

Step 1: Inspect the Area

Before bypassing a zone on your Honeywell alarm, ensure no intruder or unauthorized personnel can enter the area. Make sure all entrances and exits are secure and clear of any obstructions. Look at the wiring diagram for your system to identify which zone you need to bypass. You will also be able to identify the zone by looking at the flashing LED on your alarm’s control panel.

Make Sure All Entrances
And Exits Are Secure

Step 2: Disconnect the Wiring

Once you have determined the zone you need to bypass, disconnect the wiring from its terminals. Make sure not to disturb any other wiring or connections in the process. If there is any existing failsafe circuitry on the system, make sure that it remains connected.

Step 3: Bypass the Zone

Now that the wiring has been disconnected, it’s time to bypass the zone. This is done by simply removing and reconnecting a jumper on the circuit board. The jumper should be located near the zone number of your alarm panel. If you are unsure where to locate it, consult your system’s manual.

Step 4: Test the System

Once you have bypassed the zone, make sure to test the system by triggering it. If your system does not respond, the bypass has been successful. If it does respond, then you may need to adjust the sensitivity of your alarm panel or check for any wiring problems. 

This will save you time and money in the long run as it eliminates the need to replace faulty parts or call a professional. It also helps keep your home safe by ensuring that all entrances and exits are secure. Make sure to check your system regularly to make sure that all zones are functioning properly.

Following these steps can easily and permanently bypass the Honeywell alarm zone.

8 Safety Tips for How to Permanently Bypass Honeywell Alarm Zone

  1. Before beginning the bypass process, make sure you are familiar with all of the security features on your Honeywell alarm system and understand how they work.
  2. Contact your alarm company to ensure that it is safe to bypass the zones in question. Some alarm systems may have a function that will allow you to disable certain areas of the system temporarily.
  3. Identify all the alarm zones you want to bypass and which type of sensor is connected to that zone (i.e., motion detector, door/window contact, smoke detector, etc.).
  4. Make sure you have the appropriate tools for the job – screwdriver, wire cutters/strippers, etc.
  5. Examine the wiring that runs to each sensor and identify any wires that are connected to the zone you want to bypass.
  6. Carefully remove the wires from the zone by gently pulling them out of the back plate.
  7. Place electrical tape over these exposed wire ends to ensure that no one will accidentally reconnect them to the zone.
  8. Test the system to ensure the zone is successfully bypassed, then replace all of the panels and covers on your alarm system.

By following these safety tips, you can safely and permanently bypass a Honeywell alarm zone. This should allow you to enjoy increased security within your home or business without worrying about false alarms.

You Can Safely and 
Permanently Bypass

How Can You Prevent False Alarms From Occurring on Your Honeywell Alarm System? 

  • Check all windows and doors to ensure they are shut tightly and properly latched.
  • Check the condition of your alarm system’s batteries, sensors, and motion detectors on a regular basis to ensure they are functioning correctly.
  • Make sure curtains or other objects do not block a motion detector’s view.
  • Replace any damaged or faulty sensors immediately.
  • Ensure that the temperature and humidity levels in the home are not too high, as this can cause false alarms to occur.
  • Keep pets away from motion detectors to prevent them from triggering false alarms. If necessary, install pet-immune sensors which are designed to ignore animals.
  • Train all household members on how to use the alarm system properly to avoid false alarms.
  • Make sure the alarm is turned off after everyone has left the house, or make sure that motion detectors are not active when no one is in the home.
  • Perform regular tests of the system to ensure that it is functioning correctly.
  • If you are having problems with false alarms, contact a professional who can help troubleshoot and resolve any issues.

By following these steps, you can help to ensure that your Honeywell alarm system is working as intended and free from false alarms. Regular maintenance and checks are essential to keep your system functioning correctly and securely.

How Can You Ensure Your Honeywell Alarm System is Maintained and Updated? 

A Honeywell alarm system is an important part of any home security setup. It provides the first line of defense against intruders and other threats. Keeping a Honeywell alarm system up-to-date and in proper working order is essential to ensuring that it functions as intended. By following these steps, you can ensure your Honeywell alarm system is up-to-date and working properly.

Important Part of Any 
Home Security Setup
  • Test Your System Regularly: To ensure your Honeywell alarm system is in good working condition, test it regularly using the testing button on the control panel or by entering a code into the keypad. Make sure to check all the sensors and motion detectors, as these are important for detecting any potential intruders.
  • Upgrade Software: Make sure to upgrade your Honeywell alarm system’s software regularly. This will ensure that your system is protected against any new threats or vulnerabilities discovered since the last update. You can usually find the latest updates on Honeywell’s website or contact their customer service team for assistance.
  • Clean Sensors and Motion Detectors: Keeping the sensors and motion detectors clean will help ensure they work as effectively as possible. Use a soft cloth to remove any dust or debris that may be obstructing their view or preventing them from detecting movement properly. Make sure not to use anything abrasive on the sensors, as it could damage them.
  • Check Batteries: Your Honeywell alarm system runs on batteries, so it’s important to check the battery life regularly and replace them when necessary. If you’re unsure of how often to change your batteries or which type you should use, consult the manual that came with your alarm system or contact customer service for help.
  • Permanently Bypass Honeywell Alarm Zone: If you want to bypass a Honeywell alarm zone permanently, you can do so by disconnecting the wiring from the sensor or motion detector that is connected to the zone you want to bypass. This will effectively disable that particular zone in your system and allow you to continue using the rest of the system as normal. Be careful when performing this task, as it can have an effect on the overall security of your home.

By following these steps, you’ll be able to ensure that your Honeywell alarm system is properly maintained and updated. This will help keep your home safe and secure from any potential intruders or threats.

Ensure Alarm System is Maintained and Updated


In conclusion, bypassing a Honeywell alarm zone is not a difficult process. You can easily bypass the security system by disconnecting its power source, identifying and removing any connected wires, and reinstalling them to permanently bypass the alarm zone. This process also allows you to reset the alarm system later if desired. 

Additionally, it’s important to note that this is not a recommended solution for those looking to use the alarm system. If you do bypass the security system, it’s important to ensure all other safety measures are in place and properly maintained. I hope this article has been beneficial in learning how to permanently bypass honeywell alarm zone. Make Sure the precautionary measures are followed chronologically. 

Leave a Comment