How to Remove Adt Touch Panel From Wall

Do you have an ADT touch panel in your home that needs to be removed from the wall? You’re not alone – many people don’t realize how simple it is to take off an ADT Touch Panel once they do need to remove it. Here, we’ll walk through the step-by-step process of how to remove adt touch panel from wall safely and efficiently, so you can get started quickly on DIY projects or alarm installation. Keep reading if you’re interested in taking care of this task yourself!

How to Remove Adt Touch Panel From Wall

If you’ve ever experienced the inconvenience of changing the settings on an ADT control panel, or worse yet, trying to remove it from the wall without damaging your walls and decor, then this post can help. With a few simple steps and tools you can easily remove an ADT touch panel from your wall in no time. The process is relatively easy but requires special caution as some models need to be disconnected from power before they are taken down – don’t forget that safety first! Keep reading for our guide on how to correctly (and safely) take off an ADT Touch Panel so you can get back to enjoying peace of mind at home.

Why May You Want to Remove the Adt Touch Panel From the Wall?

1. To Replace It With a Newer Model

One of the most common reasons for wanting to remove an Adt touch panel from the wall is to replace it with a newer model. This might be because you need a more advanced panel with more features, or simply because you want one that better fits into your home’s decor.

2. To Relocate It Elsewhere In Your Home

Another reason why you may need to remove your Adt touch panel from the wall is to relocate it elsewhere in your home. This could be because you need better access or visibility, or simply just to make the panel more convenient for use.

3. To Install a Different Brand of Panel

Finally, another reason why you may want to remove an Adt touch panel from the wall is if you decide to install a different brand of panel. You may have found one that offers more features, or perhaps you just like the design better.

How to Remove Adt Touch Panel From Wall in 5 Easy Steps

Regardless of why you need to remove an Adt touch panel from the wall, this guide will provide all the necessary steps and information you need to do so safely and properly. So let’s get started!

Step 1: Gather All The Tools You Will Need

The very first step is to make sure you have all the tools necessary for the job. This includes a flathead screwdriver, a wire stripper, pliers, a drill and appropriate bits or hole saws.

This Includes a Flathead Screwdriver

Step 2: Disconnect The Wiring

Before you begin removing the panel itself, it is important that you disconnect any wiring connected to it. Carefully unscrew the cable connector from its location, taking care not to break or damage it in any way. Once disconnected, you can set aside the cables for now.

Step 3: Remove The Panel

Now it is time to remove the panel itself. With your flathead screwdriver, carefully unscrew the screws that are holding the panel in place on the wall and set them aside. Once the screws are removed, you should be able to pull off the panel from its mounting plate.

Step 4: Remove The Mounting Plate

Now that the Adt touch panel is removed from the wall, it is time to remove the mounting plate which holds it in place. Use your screwdriver to unscrew any remaining screws or nails holding the plate to the wall and carefully remove it.

Step 5: Clean Up The Wall

Now that the mounting plate is removed, you can inspect the wall for any damage or loose debris left behind from the removal process. Use a damp cloth to clean up any dirt or dust before proceeding with your project.

Finally, you’re done! Now that you know how to remove an Adt touch panel from the wall, you’re ready to begin your project. Good luck and stay safe!

Some Additional Tips to Remove Adt Touch Panel From Wall

1. Avoid Brute Force When Attempting to Remove the Panel

This is especially important if the wall is made of drywall or plaster. Using too much force could damage the wall, leading to costly repairs down the line. Also, if the panel itself is damaged, it may be difficult to replace without professional help.

Using Too Much Force Could Damage the Wall

2. Take Note of Where the Wires are Connected

Before you attempt to remove the panel, make sure you take note of where each wire is connected so that you can reconnect them correctly when re-installing the panel or another device in its place.

3. Use a Utility Knife for Hard-to-Reach Areas

If you’re having difficulty reaching certain areas of the panel, using a utility knife can help remove it with more ease. Just make sure to be cautious and not damage any of the wires when using it.

4. Gently Pull Out the Panel with Firm Pressure

When attempting to remove the panel, gently pull out each side with firm pressure. Doing this should come off with ease if done properly. If it’s not coming off easily, double-check that all screws have been removed, as well as any adhesive.

5. Lay Down a Towel to Protect the Floor from Damage

Before you start removing the panel, it’s always a good idea to lay down a towel or some other type of cloth on the floor to protect any damage that may occur when taking off the panel. Taking these precautions will help ensure that your floors remain in good condition and prevent any costly repairs.

Follow these tips and you’ll be able to safely and easily remove your Adt Touch Panel From Wall with minimal fuss or damage! With a bit of patience, you’ll have it off in no time. Good luck!

Frequently Asked Question

What Precautions Should I Take When Removing an ADT Touch Panel from a Wall?

When removing an ADT touch panel, it is important to take certain precautions to ensure the safety of both yourself and the panel. Always make sure that the power source is turned off before attempting to remove the device. Additionally, be careful when handling any exposed wires or connections as these may be live. Once the power source is off and all exposed wires are safely secured, you can begin to remove the panel from the wall.

What Tools Do I Need to Remove an ADT Touch Panel?

The tools necessary for removing a touch panel will vary depending on how it was installed in the first place. Generally, you should have screwdrivers of various sizes, wire cutters or strippers, a flathead screwdriver, and a drill. Some installation might require specialized tools such as drywall saws or carving knives.

Need Wire Cutters or Strippers Also

How Do I Remove an ADT Touch Panel?

Before attempting to remove the panel from the wall, make sure that it is properly unplugged and all exposed wires are secured as detailed above. To remove the panel, you need to start by unscrewing all of the mounting screws using the appropriate tools. Once these are removed, slowly and carefully pull the panel away from the wall. Depending on how it was installed, there may be additional steps such as cutting through drywall or prying off mounting brackets. Make sure to follow instructions carefully when performing any specialized tasks.

How Do I Dispose of the Old ADT Touch Panel?

The best way to dispose of an old ADT touch panel is to take it to a local recycling center that accepts electronic waste. Alternatively, you can contact your local authorities or the manufacturer for more information regarding proper disposal methods.

What Should I Do After Removing an ADT Touch Panel?

Once you have removed the ADT touch panel, make sure to properly dispose of it. Additionally, it is important to check for any exposed wires or connections that may have been damaged during the removal process. If any are found, they should be safely secured in accordance with local guidelines before installing a new panel.

Check for Any Exposed Wires or Connections


Working with an adt touch panel may seem intimidating, but it’s actually relatively easy and painless. Taking the time to understand the instructions, wearing protective gear for safety and taking your time will help you successfully remove your adt touch panel from the wall in no time. Remembering to turn off any power source before removing any equipment is key in avoiding potential danger or injuries during installation. 

Now you know how to remove adt touch panel from wall! When in doubt, do not hesitate to contact a professional or ask for assistance and advice. You can take comfort in knowing that once your adt touch panel is removed from your wall, you’ll now be able to upgrade it or learn more about how it works without any interference. Taking the time out of your day to better understand your security system will help you in the long run.

Leave a Comment