If you are like me, you lock your doors pretty much all the time. Whether you’re just running outside to grab the mail or are leaving for an extended period, it’s important to make sure your home is as secure as possible. One way to do that is to install a Schlage door knob with a lock cylinder.
But what do you do if you lose your key or accidentally lock yourself out? In this blog post, we’ll show you how to remove lock cylinder from schlage door knob so that you can get back into your home without having to call a locksmith!
What Causes a Schlage Door Knob to Become Locked?
There are a few reasons your Schlage door knob might become locked. If you have a keyed entry knob, it could be that the key is stuck in the lock or that the wrong key was inserted. If you have a push button entry knob, it could be that the batteries are dead or that someone has accidentally pressed the lock button. Another possibility is that the locking mechanism has become jammed.
Additionally, if you have a keyless entry knob, the lock may have been programmed only to accept certain fingerprint patterns. The other possibility is that someone has changed the code without your knowledge. It’s also possible that the knob needs to be reset. Lastly, if you have an Electronic Deadbolt, the batteries may be low, or there could be a problem with the wiring.
Step by Step How to Remove Lock Cylinder From Schlage Door Knob
1. Look for a Screw
You’ll first want to see if there is a small screw on the inside of the knob. If there is, use a Phillips head screwdriver to remove it. First, insert the blade of the screwdriver into the slot and then turn it clockwise. The knob should come right off. If there isn’t a screw, move on to the next step.
2. Remove the Screwless Rosette
If there isn’t a screw, chances are you have a screwless rosette. To remove this type of knob, start by prying off the small, decorative plate on the interior side of the door. Underneath this plate, you should see a small slot. Insert a flathead screwdriver or a butter knife into the slot and twist. This will release the pressure on the knob and allow you to pull it off.
3. Pull Out the Cylinder
Once you have removed the knob, you should see the cylinder. It’s the part that sticks out and is usually brass-colored. To remove it, first, insert a flathead screwdriver into the small hole on the side of the cylinder. Once the screwdriver is in place, twist it clockwise until the cylinder pops out. If the cylinder is stuck, you may need to use a hammer to tap the screwdriver and loosen it up. Avoid hitting the cylinder itself, as this could damage it.
4. Replace the Cylinder
Once you have removed the old cylinder, you can insert a new one. First, insert the new cylinder into the knob. Make sure that it is inserted all the way. Next, use the screws to secure it in place. Be sure to use the correct size screws; using the wrong size can strip the threads. Finally, test the new cylinder to make sure it works properly. If it does not work, you may need to adjust the screws. If you still have difficulty, you can consult a locksmith or the manufacturer of the knob.
5. Put the Knob Back on the Door
Once the new cylinder is in place, you can reattach the knob. First, align the knob so that the spindle is in the hole in the latch. Then, push the knob onto the spindle until you feel it click into place. Make sure the knob is facing the correct direction before you put the screws back in (if your door has them). If everything is aligned correctly, the screws should go in easily. If they don’t, take the knob off and try again.
6. Test the Lock
Once the knob is back in place, test the lock to make sure it is working properly. First, insert the key and turn it clockwise. The knob should unlock. Next, turn the knob clockwise to lock it. Again, the key should be able to unlock it. If the lock is not working properly, double-check to make sure that the cylinder is inserted correctly and that the screws are tight. You may need to consult a locksmith if the lock still does not work.
Some Simple Ways How to Remove Lock Cylinder From Schlage Door Knob
1. Use a Nail File
A nail file is one of the most effective and easiest ways to remove a lock cylinder from a Schlage door knob. All you need to do is insert the nail file into the keyway and push it until the lock cylinder pops out. If the lock cylinder is stubborn, you can use a hammer to tap on the file to help loosen it.
2. Use a Paperclip
Another easy way to remove a lock cylinder from a Schlage door knob is by using a paperclip. First, straighten out the paperclip and insert it into the keyway. Then, push and twist the paperclip until the lock cylinder pops out. If the paperclip is too thin, you can use a bobby pin or a hairpin. Avoid using a metal hanger as it can damage the lock cylinder.
3. Use a Toothpick
If you don’t have a paperclip or a nail file, you can use a toothpick to remove the lock cylinder from the doorknob. Start by inserting the toothpick into the hole in the doorknob. Then, turn the toothpick until you feel it catch on something inside the doorknob. Once you feel the toothpick catch, pull it out, and the lock cylinder should come with it.
4. Use a Knife
If you don’t have any other tools available, you can use a knife to remove the lock cylinder from your Schlage door knob. First, insert the knife’s blade into the space between the doorknob and the plate. Next, twist the knife until you feel the cylinder pop out. Finally, remove the cylinder from the doorknob and discard it. If you are having trouble removing the cylinder, you can try using a screwdriver or a paperclip.
5. Use a Pliers
If the lock cylinder is really stuck, you can use a pair of pliers to remove it. First, insert the tips of the pliers into the keyhole. Then, turn the pliers to the left or right until the cylinder pops out. Be careful not to damage the surrounding area while you’re doing this.
6. Call a Locksmith
If you’ve tried all the above methods and still can’t remove the lock cylinder, your best bet is to call a locksmith. They will have the tools and expertise to remove the cylinder without damaging your door. Locksmiths usually charge by the hour, so be sure to ask for a quote before they begin work.
Tips and Warnings on How to Remove Lock Cylinder From Schlage Door Knob
Tips:
- Be sure to have the correct replacement cylinder.
- Insert the new one the same way the old one was inserted.
- If the new cylinder does not fit, file down the edges until it does.
- If the new cylinder is larger than the old one, you may need to replace the entire doorknob.
Warnings:
- Do not force the new cylinder into place.
- If you cannot get the new cylinder to fit, take it to a locksmith or hardware store for assistance.
- Do not use a broken or damaged lock cylinder. This could cause your door to become stuck shut or fail to secure properly.
- Be careful not to lose any of the small parts when removing or installing the new cylinder.
- Make sure the new cylinder is inserted all the way into the doorknob before replacing the retaining clip or screw. Otherwise, the cylinder may fall out and get lost.
How Much Does It Cost to Remove Lock Cylinder From Schlage Door Knob?
The cost of removing a lock cylinder from a Schlage door knob will vary depending on the tools and methods used. The cost will be minimal if you use a paperclip or a toothpick, but it will be more if you need to call a locksmith. Expect to pay around $50 for a locksmith to remove the cylinder. The cost will be higher if you need to replace the entire doorknob.
Conclusion
So there you have it! Now you know how to remove lock cylinder from schlage door knob. Follow the tips and warnings above to avoid damaging your door. And if you’re ever in a bind, don’t hesitate to write us; we’re always happy to help!
You Can Check It Out to Secure Chain Link Fence to Ground
