Have you ever been locked out of your house? It’s a frustrating experience and one that can easily be avoided with a Shurlok lock box. These handy devices are designed to keep you safe by allowing you to lock and unlock your door without a key. But what do you do if the Shurlok lock box becomes stuck on the doorknob? This article will show you how to remove shurlok lock box from door knob. Keep reading for more information.
What Causes a Shurlok Lock Box to Become Stuck on a Door Knob?
Several reasons a Shurlok lock box might become stuck on a door knob. The most common reason is that the locking mechanism is jammed. This can happen if the lockbox is not properly lubricated or if it is old and rusty. Another possibility is that the box was not properly installed on the door knob. Finally, if the box is not flush with the door knob, it can become stuck.
Additionally, if the box is not screwed in tightly enough, it can also become stuck. The final possibility is that the box is damaged. If the box is cracked or broken, it will not be able to grip the doorknob properly and will become stuck.
11 Ways How to Remove Shurlok Lock Box From Door Knob
1. Lubricate the Lock
If the lock is old and rusty, it might be difficult to remove. However, you can try lubricating the lock to see if that makes it easier to remove. First, remove the batteries from the lock. Next, apply a few drops of lubricant on a cotton swab to the keyhole. Finally, insert the cotton swab into the keyhole and twist it around. If the lock is still stuck, move on to the next method.
2. Insert a Screwdriver
If the lock is jammed, you might be able to remove it by inserting a small screwdriver into the keyhole. Screwdriver sizes can vary, so you might need to experiment to find one that works. Be careful not to damage the lock. First, try inserting the screwdriver and turning it clockwise. If the lock does not budge, try turning the screwdriver counterclockwise.
3. Use a Knife
If you do not have a screwdriver, you can try using a knife to remove the lock. Knife blades are often thin enough to fit into the keyway and turn the locking mechanism. First, insert the blade into the keyway and feel around for the locking mechanism. Once you have found it, apply pressure to the blade and turn it as you would a key. This method may take some time and patience, but it is worth a try if you do not have a screwdriver on hand. Be very careful when using a knife, as you could damage the door knob.
4. Use Pliers
Pliers can also be used to remove a Shurlok lock box from a door knob. This method can be used if the lock is jammed or if the key is lost. First, unscrew the cap from the back of the lockbox. Next, use pliers to grip the metal tab on the back of the lockbox. Pull the tab up and outwards to release the lock box from the door knob. If the tab is difficult to reach, you can try using a paperclip to pull it up.
5. Use a Hairpin
If you do not have any tools on hand, you can try using a hairpin to remove the lock. This method is similar to using a screwdriver. First, straighten out the hairpin. Then, please insert it into the hole on the bottom of the lock. Finally, apply pressure to the hairpin until the shackle pops open. While this method may take a few tries, it is worth a shot if you do not have any other tools available.
6. Use a Bobby Pin
A bobby pin can also be used to remove a Shurlok lock box from a door knob. This method is a bit more difficult, but it may be your only option if you don’t have a paperclip handy. Start by straightening out the bobby pin. Then, insert the bobby pin into the keyhole on the Shurlok lock box. Next, use the bobby pin to try to push the locking mechanism inside the lockbox. If you’re lucky, the bobby pin will trigger the locking mechanism, and the Shurlok lock box will come off the door knob.
7. Apply Heat
If the lock is old and rusty, you might be able to remove it by applying heat. This method will not work on all door knobs, but it’s worth a try. Use a hair dryer or a heat gun to apply heat to the lock. Be careful not to overheat the lock, as this could damage it. Apply heat for a few minutes, then try to remove the lock again. If this method doesn’t work, you’ll need to resort to more drastic measures.
8. Use Wd-40
Wd-40 is a lubricant that can be used to remove a Shurlok lock box from a door knob. This method is best used if the lockbox is not too tight on the door knob. First, spray a generous amount of Wd-40 on the lockbox. Let it sit for a few minutes to lubricate the lockbox. Next, use a flat head screwdriver to pry the lock box off the door knob. Be careful not to damage the doorknob when doing this. Finally, wipe off any excess Wd-40 with a rag.
9. Use a Hammer
You can try using a hammer to remove the lock if all else fails. This method should only be used as a last resort. Position the tip of the hammer against the center of the shackle. Apply pressure to the handle of the hammer and strike the head of the hammer with your other hand.
The impact force should break the shackle and allow you to remove the lock. If the shackle does not break, you can try using a chisel to create a notch in the shackle. Insert the chisel into the notch and strike it with the hammer until the shackle breaks.
10. Break the Door Knob
If you still have trouble removing the lock, you can try breaking the doorknob. This method should only be used as a last resort, as it can damage your door. To break the door knob, you will need a hammer and a screwdriver.
First, use the screwdriver to remove the screws from the door knob. Next, use the hammer to strike the doorknob until it breaks. Once the door knob is broken, you should be able to remove the lock. If you cannot remove the lock after breaking the doorknob, you can try using a saw to cut through the lock.
11. Call a Locksmith
If you’ve tried all the methods above and still can’t remove the lock, your only option is to call a locksmith. A locksmith will be able to remove the lock without damaging your door. This is the most expensive option, but it is worth it if you can’t remove the lock yourself.
Tips and Warnings on How to Remove Shurlok Lock Box From Door Knob
Tips:
- Be sure to have the correct size hex wrench for the job. The most common sizes are 3/32″, 1/8″, and 5/32″.
- Insert the hex wrench into the hole in the back of the shackle.
- Apply pressure to one side while turning the other side with the wrench. This will loosen the set screw and allow you to remove the shackle.
- If the set screw is stuck, you can try heating it with a lighter or using WD-40.
- Once the shackle is removed, you can pull the lock’s body off the door knob.
Warnings:
- Do not over-tighten the set screw when reinstalling the shackle. This can strip the hole and make it difficult to remove in the future.
- Be careful not to lose the small spring that is located under the set screw. This is what allows the shackle to return to its original position.
- If you are having difficulty removing the lock, consult a professional locksmith.
- Always reinstall the shackle before disposing of the lock. This will help prevent someone from being able to use the lock on another door.
How Much Does It Cost to Remove Shurlok Lock Box From Door Knob?
The cost of removing a Shurlok lock box from a doorknob can vary depending on the method you use. If you decide to call a locksmith, the cost will be higher than if you remove the lock yourself. The average cost of a locksmith is $60-$120, but the price can increase if the job is more difficult than anticipated. In addition, if you decide to break the door knob, you will need to purchase a new one. Door knobs can cost anywhere from $10-$50, depending on the style and material.
Conclusion
So there you have it! These are the most common methods on how to remove shurlok lock box from door knob. Follow these steps, and you should be able to get the job done quickly and easily. Be sure to exercise caution when working with any tools near the lockbox, as you don’t want to damage the unit or your door. But, with a little patience and carefulness, you should be able to remove the lockbox without any problems. Thanks for reading!