How to Remove Vivint Window Sensor

Vivint window sensors are an excellent way to protect your home from break-ins and other intrusions. They are easy to install and give you peace of mind that your home is secure. 

How to Remove Vivint Window Sensor

But what do you do when it’s time to remove them? Let’s take a look at how to remove vivint window sensor.

Can You Remove Vivint Window Sensor?

Vivint window sensors are an efficient and reliable way to protect your home from intruders. It can be confusing to determine whether or not you can take the sensors down, but the answer is yes. In most cases, Vivint allows homeowners to remove the window sensors on their own time and for various purposes.

For example, if you need to paint or fix up your windows, you can easily remove and reinstall the sensors later. However, installing or removing window sensors without professional help is still tricky; make sure that you follow Vivint’s instructions precisely to avoid any issues in other parts of the process.

As long as everything is done carefully and correctly, your home will be much more secure after the installation!

Why Should You Remove Vivint Window Sensor?

Removing a Vivint Window Sensor is always recommended when you’re ready to switch to another home security system or discontinue service. A Vivint Window Sensor is designed to detect any break-ins or disruptions in your home, and keeping it after service has been canceled will not benefit you.

Moreover, removing an old window sensor will eliminate the likelihood of it becoming outdated due to a lack of maintenance and updates, which can make the alarm less reliable. You can move on to a different security system by properly uninstalling your Vivint Window Sensor without leaving yourself open to disruption.

7 Steps to Follow on How to Remove Vivint Window Sensor

Step 1: Unscrew the Sensor from the Window Frame

The first step is to unscrew the sensor from the window frame. It should be easy enough to do this by hand, as long as you don’t overtighten the screws.

Unscrew the Sensor

If they are too tight, you may need a screwdriver or another tool to loosen them. Once all the screws are removed, you can pull the sensor off the frame.

Step 2: Disconnect Wires from the Sensor

Once the sensor is free from its mount on the frame, it’s time to disconnect any wires that may be attached to it. This can usually be done by simply unplugging them or pulling them out of their connections on the back of the sensor. Take care not to yank or tug hard on these wires, as this could cause damage or interfere with their functionality in some way.

Step 3: Clean Up Any Adhesive Residue                    

Next, take a look at where your sensor was mounted on your window frame and check for any adhesive residue left over from when it was installed.

All adhesive residue must be removed before installing a new sensor, so take some time here and clean up any residue left behind by using a damp cloth or paper towel and some mild detergent solution if necessary.

Once everything has been cleaned up and dried off, you can replace your old sensor with a new one if desired!

Step 4: Remove the Battery    

Once all adhesive residue has been cleaned up, it’s time to remove the battery from your Vivint window sensor. This can be done easily by using a small flat-head screwdriver to open the back of the case and then lift out the battery.

Step 5: Discard the Old Sensor        

Once the battery has been removed from the sensor, you can now safely discard your old Vivint window sensor. Be sure to dispose of it properly according to all applicable local laws and regulations.

Step 6: Reconnect Wires

If you have wires connected to your window sensor, it’s time to reattach them. Carefully plug each wire back into its designated port on the back of the new sensor and ensure they are snugly in place before moving on.

Step 7: Re-Mount the Sensor  

The final step is to re-mount the new sensor onto your window frame. Then, simply use the screws that held your old sensor in place and tighten them securely. Once everything is tightened up, you’re all set and ready to go with a brand-new Vivint window sensor!

Go With a Brand-new Vivint Window Sensor

That’s it! You’ve now learned how to remove Vivint window sensor. Following these steps will help ensure you can safely and correctly uninstall your old sensor, ready to install a new one if desired.

Things You Need to Know Before Removing Vivint Window Sensor

Before removing a Vivint window sensor, it is important to weigh the pros and cons involved in doing so. In addition, it is critical to be aware of the difficulties that may arise if you remove the sensor, such as an inaccurate reading or false alarm for that window.

Armed with the knowledge of why you want to uninstall and what is at stake, you can decide how best to proceed with either removals or repairs.

Additionally, note where to locate the product manual for your Vivint security system, as this could prove immensely helpful during installation or removal as it will provide descriptions of materials and tools necessary for success.

Knowing what challenges may happen can actually save you time and money in the repair should something go awry down the line.

Benefits of Removing Vivint Window Sensor

Vivint Window Sensors give users peace of mind in knowing their home or business is secure. However, if, for some reason, it’s time to remove one, there are still many benefits. First, by removing the sensor, users may be able to upgrade to a newer system with more advanced features.

Additionally, removing a window sensor leaves more space for additional security components to be installed – further enhancing protection. Finally, properly removing the window sensors will eliminate any false alarms from going off and keep your home or business safe from unintentional security breach notifications.

Ultimately, removing Vivint Window Sensors provides options for increased safety as you will gain more control over how your home or business is protected.

You Can Check It Out Install Alarm Sensor on Sliding Door

6 Common Mistakes People Make When Trying to Remove Vivint Window Sensor

1. Not Reading the Instructions

One of the most common mistakes people make when trying to remove a Vivint window sensor is not reading the instructions. The Vivint system is complex, and it is important to understand how it works before attempting to remove any part of it. Failing to read the instructions can damage the system or even cause injury.

2. Not Disarming the System First

Another common mistake is forgetting to disarm the system before attempting to remove the sensor. The Vivint system is designed to be tamper-proof, and attempting to remove a sensor without disarming the system first will trigger an alarm. This can be extremely frustrating and may even result in a call from the police.

3. Trying to Remove the Wrong Sensor

There are different types of Vivint sensors, and each type is designed to be removed in a different way. Attempting to remove the wrong type of sensor can damage the system or cause it to malfunction. Knowing which type of sensor you need to remove is important before attempting to do so.

Different Types of Vivint Sensors

4. Damaging the Sensor

When removing a Vivint sensor, it is important to be careful not to damage it. Damaging the sensor can cause it to malfunction or stop working altogether. If you are not careful, you may also damage other parts of the system.

5. Not Putting Everything Back Together Properly

After you have removed the sensor, it is important to put everything back together properly. Failure to do so can result in damage to the system or injury. Ensure all screws and bolts are tightened securely before testing the system again.

6. Not Testing the System After the Removal

Once you have removed the Vivint window sensor, it is important to test the system to ensure it is working properly. Failure to test the system can result in false alarms or even injury.

Can I Reuse the Existing Mounting Bracket when Replacing My Vivint Window Sensor?

Replacing a Vivint window sensor can be a simple process, and you may even wonder whether you can use the existing mounting bracket. Generally speaking, it’s always best to use a new mounting bracket when replacing your Vivint window sensor for increased safety and security.

However, if the existing mounting bracket is still intact, there’s nothing necessarily wrong with reusing it to save time and money on installation. Just make sure whatever screws or bolts from the existing mounting bracket are in good condition before going ahead with this plan.

Additionally, checking that the new Vivint window sensor fits snugly into your existing mounting bracket is also important for achieving optimal function.

Replacing a Vivint Window Sensor

You Can Check It Out Disconnect Honeywell Alarm System


Removing Vivint window sensors is quite simple; just unscrew them from where they were mounted on your window frames, disconnect any wires attached to them, and clean up any adhesive residue left behind before installing a new one if desired!

With just a few simple steps, you can easily ensure that your windows remain secure without worrying about outdated sensors getting in your way! Thanks for reading our guide on how to remove Vivint Window Sensor—we hope it was helpful!

Leave a Comment