How to Reset Automatic Doors

Automatic doors are a great convenience for both commercial and residential buildings. They provide easy access to areas that may otherwise be difficult or time-consuming to open manually.

How to Reset Automatic Doors

However, if the automatic door malfunctions, it can lead to safety issues as well as disruption of business operations. Knowing how to reset an automatic door is important so that you can quickly address any issues that arise.

One of the major advantages of resetting automatic doors is that it saves time and energy. When there’s a malfunction or power outage, resetting automatic doors can help you get things running again quickly.

Not only is this more convenient than manually opening and closing each door, but it also allows for more efficient traffic flow. If a door is stuck in the open or closed position, resetting it will help to restore normal operation. In this blog post, You will learn in detail how to reset automatic doors.

Step-by-step Instructions for How to Reset Automatic Doors

Step 1: Inspect the Area

Before resetting an automatic door, inspecting the area carefully for safety concerns is important. Check for any debris, loose wires, or objects that could create a tripping hazard. Find and open the maintenance access panel at the base of the door’s frame. This should be located behind the kick plate near the floor, typically on either side of the door.

Step 2: Locate Door Operator Unit

The door operator unit is the box that controls the movement of the automatic door. It will have a power cable and a control cable connected to it. Before resetting the door, disconnect both the power and control cables from the operator unit. This will prevent any injury or damage caused by electricity.

Step 3: Replace the Power Cable

Make Sure That the Connection is Secure

Replace the power cable in the same port as it was removed from. Make sure that the connection is secure. Once the power cable is securely connected, resetting the door operator unit should be fairly straightforward. Some units require a specific code to reset, so refer to the product manual for instructions on how to do this.  

Step 4: Reconnect Control Cable

Once the door operator unit has been reset, reconnect the control cable. Make sure that this connection is secure as well. Close the maintenance access panel and make sure it is securely in place. Once the access panel is closed, test the door’s functionality to ensure it works properly. Open and close the door a few times and check for any errors or stoppages.

You can now enjoy your fully functional automatic door if everything checks out. Be sure to check the door periodically for any issues, and refer to the product manual if you need help with maintenance or resetting again.

Safety Tips for How to Reset Automatic Doors

  1. Unplug the automatic door opener prior to attempting resetting the door opener. This will ensure that no electric shock is experienced while making adjustments.
  2. Always wear protective gloves and safety goggles when working on an automatic door opener.
  3. Check for any loose or worn parts before attempting to reset the door opener, and replace any parts if necessary.
  4. Use only the proper tools when attempting to reset the door opener, as improper tools can cause damage to the door opener or other components attached to it.
  5. Adjust all settings in accordance with the manufacturer’s instructions that came with the door opener.
  6. Verify that each setting is properly adjusted before plugging the door opener back in to prevent unnecessary damage or injury.
  7. Test the door opener for proper performance after resetting it, ensuring that all settings are correct.
  8. Ensure that the automatic door opener is regularly maintained according to manufacturer recommendations to avoid any issues or sudden malfunctions.
Test the Door Opener

These safety tips can help ensure your automatic door opener is reset properly and safely. Resetting an automatic door opener can be tricky, but with the right precautions and considerations, it can be done safely.

Are There Any Risks Associated With Resetting an Automatic Door? 

When resetting an automatic door, it is important to exercise caution and follow safety protocols. Automatic doors are powered by electronic components that can pose risks if handled improperly. To minimize risk when resetting an automatic door, always make sure the power supply has been disconnected, and all personnel in the vicinity have been cleared out of the area.

It is also important to make sure that the automatic door has been checked for any damages, such as broken wiring or loose parts. If there are any issues with the door’s system, it is best to contact a professional before attempting to reset it.

Additionally, never attempt to bypass safety features like sensors or emergency stop buttons when resetting an automatic door. Doing so can create an unsafe situation and endanger those using the door.

By following the proper safety protocols, resetting an automatic door can be done safely without any major risks. If you are unsure how to proceed, contacting a professional for assistance is best. They will have the right knowledge and equipment to help reset the door without causing any harm.

What Type of Maintenance Should Be Done Regularly on an Automatic Door? 

Regular maintenance on an automatic door is important for it to remain in good working order. This includes making sure that the sensors are properly aligned, checking for damaged parts or components, and ensuring that all programming is current.

Additionally, periodically cleaning and lubricating the tracks can help reduce wear and tear on the door’s mechanisms. Finally, visually inspecting the door and its internal components can help identify any potential issues before they become more serious.

If an issue is found, it’s important to contact a qualified technician to diagnose and fix the problem as soon as possible. Regular maintenance of an automatic door will ensure that it continues to operate reliably for years to come. If the door has been reset, it’s also important to repeat the manual calibration procedures.

This will help ensure that sensors are properly aligned and able to detect when someone is passing through the doorway. If these steps aren’t taken, then the door may not operate as efficiently as it should.

How Can You Prevent Future Malfunctions or Damage to an Automatic Door? 

In order to keep an automatic door running smoothly, it is important to take preventative measures. Regularly check and clean the sensors, as dirt buildup can lead to false activation. It is also important that the motor and other components are regularly lubricated according to the manufacturer’s instructions in order to ensure proper operation.

Regularly Check and Clean the Sensors

Additionally, if the door is exposed to extreme weather or elements, it should be inspected and serviced more often than usual. If any damage is noticed, it should be repaired immediately before it has a chance to cause further harm. Taking these steps can help prevent malfunctions or damage in an automatic door system, making resetting the door less likely in the future.

It is also important to check regularly for any recalls or updates that the manufacturer may issue for the specific model of door you have. If there are any safety-related issues with your automatic door, it is essential that they are addressed immediately.

Taking these precautions can help keep your door running safely and smoothly for many years to come.  By taking the time to maintain and service your automatic door properly, you can prevent any future resets or malfunctions from occurring.

How Often Should You Check the Battery Life of an Automatic Door? 

The battery life of an automatic door is important in ensuring the smooth operation of your system. Depending on the type and size of the door, it may be necessary to check its battery life regularly. Doors that are used frequently should be checked more often than those that are used less often.

Generally speaking, you should aim to check the battery at least once a month to ensure your automatic door’s safe and efficient operation. During the battery check, you will want to make sure that the power levels are where they should be.

Check the Battery at Least Once a Month

If you notice that the batteries are not performing as expected, replacing them may be necessary. Also, if there is any damage or wear and tear to the system, you should speak to a professional to ensure it is repaired as soon as possible. Once the battery life has been checked and any necessary repairs have been made, you can reset your automatic door.

This can be done through the system’s control panel or manually by pressing a reset button or switch. After the reset has been completed, the door should be tested to make sure it operates properly.


In conclusion,  resetting an automatic door can be a relatively straightforward task as long as you have access to the right tools and resources. Before attempting this project, make sure to review the instructions provided by your automatic door manufacturer for any additional steps that may be required.

Once you have all the necessary tools and materials ready, it should take no more than an hour to complete the reset. Doing so will ensure that your doors continue operating safely and efficiently for many years to come.

If done correctly, you can enjoy the convenience of automatic door access without having to worry about a costly repair or replacement. I hope reading this post has helped you learn how to reset automatic doors. Make sure the safety precautions are carried out in the order listed.

Leave a Comment