How to Reset Ring Door Sensor

Are you having trouble figuring out how to reset ring door sensor? If so, then you are in the right place!

The Ring Door Sensor is a convenient and smart solution that can help keep track of your home’s front door and alert you anytime it opens or closes. Installing and setting up the Ring Door Sensor on your home’s exterior doors is surprisingly easy, but if you ever need to reset it, this guide will walk you through each step of the process. 

How to Reset Ring Door Sensor

Resetting this device can be tricky but don’t worry, by following our step-by-step guide, you can reset your sensor in no time. We’ll go over various methods to help you complete this process quickly and painlessly while giving detailed instructions so anyone can understand them. So let’s get started – it will take some time!

What Will You Need?

Before you can reset your Ring Door Sensor, you will need a few things. Make sure to have the following items nearby:

  1. The Ring Door Sensor and its mounting bracket
  2. Any necessary tools for taking down the sensor (screwdriver, etc.)
  3. A paper clip or similar object
  4. A flathead screwdriver

Now that you have what you need, it’s time to get started with the reset process.

10 Easy Steps on How to Reset Ring Door Sensor

Step 1. Unmount the Ring Door Sensor:

To begin, you will need to remove the Ring Door Sensor from its mounting bracket. Use the necessary tools (screwdriver, etc.) to take it down from the wall or door frame. Be careful not to break the sensor in any way.

Step 2. Disconnect Power:

Once the ring door sensor is unmounted and in your hands, disconnect its power by taking out the batteries located inside of it. As a safety precaution, remove any sources of power from the device. Try to avoid coming in contact with any of the wires located inside.

Disconnect the Power

Step 3. Insert a Paper Clip:

Next, take a paper clip or similar object and insert it into the reset hole located on the backside of the device. Hold for five seconds, and then release. Don’t worry, this will not damage the sensor in any way. Be careful, though, as the paper clip should not be inserted too far into the reset hole.

Step 4. Reinsert Batteries:

Now that you have inserted a paper clip into the reset hole put all of your battery inside your sensor. Ensure everything is firmly put in place and all screws are tightened securely. If there are any loose connections, the reset won’t be successful.

Step 5. Press the ‘Test’ Button:

Now press the “test” button at the bottom of your device for five seconds, then release it. This will ensure that your device is properly reset. You can also hear a ‘beep’ sound confirming the successful reset.

Step 6. Reconnect Power Source:

Once you have pressed the “test” button, reconnect any external power sources, such as a power adapter or AC outlet, to get your Ring Door Sensor back up and running. Another way to check if your device is reset correctly is to press the “test” button again, which should also produce a sound. You can also check the Ring Door Sensor app to ensure the device is detected.

Step 7. Reattach Mounting Bracket:

The next step is to reattach the mounting bracket onto the wall or door frame from which it was originally installed. Ensure it is firmly secured before moving on to the next step. Keep any tools used during this process handy in case you need to make any adjustments.

Step 8. Put Batteries Back In:

Now reinsert all your batteries into your Ring Door Sensor device and ensure everything is tightly put in place. Once again, be careful not to touch any of the internal wires while doing so, as this could cause damage to your device or affect its functionality. Check that all batteries are secure and no power sources are loose.

Put Batteries Back in

Step 9. Test the Device:

At this point, you can test out your Ring Door Sensor by pressing down on the “test” button at the bottom of it for five seconds and then releasing it. If you hear a ‘beep’ sound, then great – that means it has been successfully reset.

Step 10. Enjoy:

And that’s it – your Ring Door Sensor is now reset and ready to use! You can now enjoy the convenience of having your door monitored at all times, with notifications for any changes in its status or activity. Remember always to keep the reset hole and “test” button clean and free of dust or debris for the best results.

We hope this guide has helped teach you how to reset the ring door sensor and that you can now keep better track of who is coming in and out of your home. With the help of this device, you can rest assured knowing that your front door is secure from unwanted visitors.

5 Additional Tips and Tricks

  1. Make sure to have a flathead screwdriver handy when resetting your Ring Door Sensor. The screwdriver removes the screws on the back of the device and opens up its casing.
  2. Before you begin, check if there’s any debris or dirt inside the device that could contribute to any functionality issues. If necessary, use a cotton swab dipped in rubbing alcohol to clean away any grime from the sensors and wires.
  3. While resetting your Ring Door Sensor, always ensure you are working on a non-flammable surface such as wood or plastic. Avoid using carpeting or rugs as these can easily catch fire if exposed to sparks from electronics work.
  4. To avoid any dangerous electric shocks, unplug the door sensor from its power source and wait for at least 15 minutes before beginning your work.
  5. After resetting your Ring Door Sensor, make sure to test it by opening the door to ensure that all the settings are working as intended. If you have any further issues with functionality, contact the customer support team of Ring for help.
Make Sure to Test It

Following these tips and tricks, you can reset your Ring Door Sensor quickly and safely! With this guide in hand, you can enjoy a smarter home security system without worrying about any issues arising due to faulty wiring or incorrect setup procedures.

5 Things You Should Avoid

  1. Avoid Using a Metallic Object: Metallic objects such as coins or keys can cause short circuits and potentially damage the internal components of your Ring Door Sensor.
  2. Avoid Using Too Much Force: When handling the reset process, be sure not to apply excessive pressure, as this can permanently damage your device.
  3. Avoid Removing Any Components From the Inside: If you need to open up the casing of your Ring Door Sensor, do not attempt to remove or alter any of its internal components, as this may cause further damage.
  4. Avoid Plugging in Any Additional Devices: Resist the urge to connect additional electrical equipment while resetting your Ring Door Sensor, such as speakers and lights. Doing so might interfere with the signal and cause incorrect readings from the sensor itself.
  5. Avoid Using Inappropriate Tools: Make sure you only use appropriate tools for opening screws and adjusting settings on your Ring Door Sensor. Using the wrong tools could damage its internal components and prevent it from working correctly.
Avoid Plugging in Any Additional Devices

By following these simple do’s and don’ts, you can successfully reset your Ring Door Sensor without any issues. With this guide in hand, you’ll enjoy a smarter home security system with peace of mind!

How Do I Fix My Ring Sensor Offline?

If your Ring Door Sensor is showing as offline, there are a few steps you can take to troubleshoot and fix the issue.

  1. First, ensure that your device has power through an outlet or batteries. If it has no power source, simply plug it in and wait for it to turn on.
  2. Check if your Ring Door Sensor is connected to Wi-Fi by opening up its app and checking its status on the Home page. If the sensor isn’t connected correctly, follow the instructions provided to reconnect it to Wi-Fi.
  3. Try resetting your Ring Door Sensor by pressing its Reset button for 10 seconds. This will reset the device to its factory settings and allow you to restore the connection.
  4. If none of these steps have worked, try moving your Ring Door Sensor closer to the router or Wi-Fi extender, as environmental factors can sometimes affect signal strength.
  5. If all else fails, contact customer support from Ring for additional help troubleshooting your connected door sensor.
Press Reset Button 
for 10 Seconds

These tips should help you get your Ring Door Sensor back online in no time! With this guide in hand, you’ll be able to keep track of any visitors at your doorstep with ease!

Which Network is Used by a Sensor?

The Ring Door Sensor is compatible with 2.4GHz 802.11b/g/n networks. This type of network provides a strong, reliable connection to the device and allows you to control it from anywhere in your home. Additionally, the sensor can be installed on a dual-band network. This type of wireless network operates on both 2.4GHz and 5GHz frequencies, giving you more flexibility in terms of your connectivity needs.

The Ring Door Sensor is also compatible with any PoE (Power over Ethernet) systems, as long as they are operating on the 802.11g or 802.11n standards. Finally, for added convenience, the sensor can be connected to Alexa or Google Assistant devices for voice control over its settings and functions.

You can enjoy an even smarter home security system by ensuring your WiFi setup is suitable for connecting your Ring Door Sensor! With this knowledge at hand, you’ll be able to rest easy knowing that your doorbell is always running smoothly and connected.

Why is My Sensor Offline?

If your Ring Door Sensor is displaying as offline, there are a few potential causes that you can look into.

  1. First, check if the device’s batteries are dead or running out of power. If this is the case, simply replace them with fresh ones, which should be working properly again.
  2. If your Ring Door Sensor still isn’t connecting properly to Wi-Fi, try moving it closer to the router to improve signal strength. It could be that environmental factors are affecting its connection capabilities due to bad reception in certain areas.
  3. The next step is resetting your Ring Door Sensor by holding its Reset button for 10 seconds until its LED light flashes. This should reset the device to its factory settings and allow you to set it up again from scratch.
  4. If none of these steps have worked, contact customer support from Ring for help investigating why your sensor is offline.

Following these steps will help you get to the root cause of why your Ring Door Sensor is showing as offline and fix any issues quickly! With this guide in hand, you’ll be able to keep track of all visitors at your doorstep without worry!


How to reset ring door sensor may seem intimidating at first, but once you have familiarized yourself with the setup process, it is a relatively simple task. To ensure your home security is up to date, it is important to be aware of your knowledge and familiarity with your door sensors.

For those who have already completed the setup process for their Ring door sensor, it’s good to check in regularly and reset as needed. Timely resets can help ensure that your sensors remain effective and help strengthen the security of your home. If you’re still having difficulty resetting a Ring door sensor, don’t hesitate to contact customer support for further assistance.

Remember, a secure home starts with smart technology and occasionally refreshing the system provides security and peace of mind. Taking control of one’s home security can be empowering, so feel confident in taking the proper steps toward resetting your Ring Door Sensor today!

Leave a Comment