How to Set First Alert Alarm System

Have you been looking for a reliable way to protect your home against intruders? A First Alert alarm system is an ideal solution for keeping your family safe and secure. 

How to Set First Alert Alarm System

With features like motion detection, door/window sensors, alarming keypads, and two-way voice communication capabilities – all of which can be monitored remotely right from your smartphone – a First Alert alarm system will give you total peace of mind. 

In this blog post, we’ll walk you through the steps on how to set first alert alarm system so that you can start greatly enhancing the security of your home today!

What Do 3 Beeps Mean on First Alert?

When your First Alert Alarm System is turned on, it will beep three times to alert you that it has successfully armed. This sound usually happens when the system is first switched on and serves as a reminder that the alarm system is active and ready to protect your home or business.

In addition to this initial beeping, the system can beep another three times to indicate that it needs attention. This usually happens when the security system is not armed correctly or if there has been an activity that triggers a sensor. In this case, you will need to check the control panel for any messages about what triggered the alert and resolve any issues as soon as possible.

To make sure that your First Alert Alarm System is working properly and securely, you should regularly test it. This can be done by using a special key fob or remote control to activate the alarm system and see if the system responds correctly. If it does not, then there could be an issue with the setup or configuration of your system that needs to be resolved.

Test Your First Alert Alarm System

No matter how often you test your First Alert Alarm System, it is important to remember that the three-beep sound indicates that the system has armed successfully and is ready to protect your home or business. If any other sounds are heard, then there may be an issue you need to address.

10 Methods on How to Set First Alert Alarm System

1. Choose Your Alarm System.

The first step is to choose the right alarm system for your needs. There are many different types of alarm systems available on the market, so it is important to do some research to find the one that best suits your needs. Some alarm systems are wired, and some are wireless, so you need to consider which type of system will work best for your particular situation.

If you want to be able to control your system remotely, then a wireless system may be the way to go. Make sure to read reviews and compare different alarm systems to get the one that is right for you.

2. Read the Instructions Carefully.

Once you have chosen an alarm system, it is important to read the instructions carefully before you begin the installation. This will ensure that you understand how the system works and how to install it properly. If you are unfamiliar with how the system works, it is a good idea to consult an expert or watch instructional videos online.

Although these systems are designed to be easy to install and use, it is still important to understand how it works before attempting the installation. However, if you are confident in your ability to install the system, then you can proceed with just the instructions.

3. Gather the Necessary Tools and Materials.

Before you begin the installation, make sure that you have all of the necessary tools and materials. Most alarm systems will require a screwdriver, drill, and wire cutters. Additionally, you may need to purchase additional batteries for the sensors or other components.

Have All of the Necessary Items Before Starting

Make sure that you have all of the necessary items before starting the installation process. Though it may be tempting to skip this step, it is important that you have everything you need before you start. Having the right tools and materials can help ensure that the installation process goes smoothly and without any delays.

4. Install the Control Panel.

The control panel is the brain of the alarm system and needs to be installed in a central location in your home. It is important to follow the instructions carefully when installing the control panel to ensure that it is properly connected to the rest of the system. 

After the control panel is installed, all other components can be connected to it. Although it is possible to install the control panel yourself, it is highly recommended that you hire a professional security technician to assist with this step. However, if you choose to do it yourself, make sure to read the user manual thoroughly.

5. Install Door and Window Sensors.

Door and window sensors are one of the most important parts of an alarm system, as they are responsible for detecting intruders. It is important to place these sensors in strategic locations around your home in order to provide maximum coverage. When installing door and window sensors, make sure you screw them into the frame of the door or window.

This will ensure that they remain securely fixed in place. Also, make sure that the sensors are in line with each other and not too close together so as to avoid false alarms. After installation is complete, test the sensors to make sure that they are functioning correctly.

6. Install Motion Detectors.

Motion detectors are another important part of an alarm system, as they can detect movement inside your home even when there are no doors or windows open. These sensors should be placed in high-traffic areas such as hallways and living rooms.

When motion is detected, the sensors will trigger an alarm that can notify the monitoring center, which will then contact emergency services if necessary. Motion detectors should be adjusted to the recommended sensitivity settings for optimal performance.

7. Install Glass Break Detectors.

Indicate a Forced Entry Into Your Home

Glass break detectors are designed to detect the sound of breaking glass, which can indicate a forced entry into your home. These sensors should be placed near windows and other potential entry points into your home. Make sure to test each detector after installation and adjust the sensitivity level to fit your needs.

Although glass break detectors are an important part of your home security system, they can be triggered by loud noises like thunder or fireworks. If you live in an area with frequent loud noise disturbances, you may want to consider other security options.

8. Install Smoke Detectors.

Smoke detectors are an important part of any fire safety plan, and they can also be used as part of an alarm system. Smoke detectors should be placed in every room of your home, as well as in hallways and stairwells. The First Alert alarm system can be connected to smoke detectors so that when the smoke detector is triggered, it will set off the alarm.

Additionally, when you connect the smoke detector to your alarm control panel, it can be programmed to trigger a specific type of alarm in the event of a fire. Make sure to check all smoke detectors regularly, testing them at least once a month and replacing the batteries as necessary.

9. Program the Control Panel.

Once the sensors and detectors are installed, you will need to program them into the control panel in order for the system to function properly. This can be done by following the instructions included with your alarm system.

Depending on the model of your alarm, you will be asked to enter a code and assign each device a specific address. If you need assistance with programming your alarm, contact the manufacturer or a professional security installation service.

10. Test and Activate Your Alarm System.

After everything is installed and programmed, it is important to test your alarm system before activating it. Make sure that all of the doors and windows are closed, then use a key fob or remote control to activate the alarm system and make sure that it works correctly.

Test Your Alarm System Before Activating It

Once you have confirmed that everything works correctly, you can arm the system and make sure that it is protecting your home or business from intruders.

How Do I Change My First Alert Code?

If you want to change the code for your First Alert alarm system, there are a few easy steps you’ll need to follow. First, make sure that all of your doors and windows are securely closed. You will also want to make sure that any motion detectors or glass-break detectors have been deactivated.

Once everything is secure, turn off the alarm system by pressing the “Off” button on your control panel. Next, locate the “Program/Enter” button on your control panel and press it twice. This will enter you into programming mode. Once in programming mode, press the “Code” button located next to the display screen. From here, you will enter your existing code and then press the “Code” button again.

Then, enter your new code into the system and hit “Enter” on the control panel to save it. Lastly, turn the alarm system back on by pressing the “On” button located next to the display screen.

Your new code is now set, and you should test it out by opening a door or window to make sure that it works properly.


A home security system is a great way to keep your family and possessions safe. When choosing an alarm system, it is important to consider what type of protection you need and how much you are willing to spend. 

First Alert offers a variety of affordable options that can be customized to fit your specific needs. With easy installation and no monthly fees, First Alert is the perfect choice for anyone looking for reliable home security. Thanks for reading, and we hope this has given you some inspiration on how to set first alert alarm system!

Leave a Comment