How to Replace Blink Outdoor Camera Battery

Keeping your home secure is important, but keeping up with the latest technology can be hard. If you’re like most homeowners, you may have installed a Blink Outdoor Camera to keep an eye on things while you’re away. 

How to Replace Blink Outdoor Camera Battery

The camera provides valuable security footage that helps maintain peace of mind – however, batteries don’t last forever and will need to be replaced eventually. In this blog post, we’ll walk through how to replace blink outdoor camera battery so that you can keep track of what’s happening around your home without any interruptions!

Types of Battery Available for Blink Outdoor Camera

There are a few types of batteries available for Blink Outdoor Camera. The most common type is the lithium-ion battery, which is rechargeable and can last up to two years with regular use. For longer-lasting power, you can also opt for an alkaline battery that will provide up to five years of continuous power, but it’s usually more expensive than the lithium-ion option.

Step-by-Step Guidelines on How to Replace Blink Outdoor Camera Battery

Step 1: Disconnect the Blink Outdoor Camera:

Before beginning the battery replacement process, you’ll need to disconnect your Blink Outdoor Camera from its power source. This can be done by unplugging the USB cable connected to the camera or unscrewing the batteries from their compartments.

Step 2: Open the Battery Compartment:

Once the power source has been disconnected, open the battery compartment located on the back of your Blink Outdoor Camera. This will expose the old batteries, which should then be carefully removed and discarded.

Step 3: Insert New Batteries into the Compartment:

Insert Your New Batteries

At this point, you can insert your new batteries into the battery compartment. The positive and negative ends should match up with the corresponding terminals inside the camera.

Step 4: Reattach Power Source:

Once the batteries are securely in place, reattach your power source to the Blink Outdoor Camera. This will ensure that it has enough power to start up and operate properly.

Step 5: Test Your New Batteries:

Finally, it’s always a good idea to test your new batteries by powering on the Blink Outdoor Camera and allowing it to run for a few minutes. If everything is working as expected, you can rest assured that your home is now secure.

Replacing the battery on your Blink Outdoor Camera is a straightforward process that shouldn’t take more than 15 minutes. With these simple steps, you can keep tabs on what’s happening around your home without any interruptions!

With regular maintenance and timely replacements, you can ensure that your security system will always be up and running – providing you with the peace of mind that comes from knowing your home is safe. 

If you’re ever in doubt about how to replace the blink outdoor camera battery, it’s always a good idea to consult the manufacturer’s instructions for assistance. Thanks for reading, and best of luck keeping your home safe!

Things to Consider to Replace Blink Outdoor Camera Battery

1. Type of Battery:

 Check the Type of Battery

Before replacing the battery, it is important to check the type of battery your Blink Outdoor Camera uses. Different cameras may require different types of batteries, and you need to make sure that you are purchasing the correct one.

2. Power Disconnection:

Make sure that the power is disconnected before attempting to replace the battery of your Blink Outdoor Camera. This will prevent any electrical shocks or damage to the device.

3. Battery Mounting:

It is important to check how the battery is mounted into the camera before attempting to replace it. Make sure that you are familiar with the mounting system, as this will make replacing the battery easier and quicker.

4. Alignment:

Ensure that the new battery is aligned properly before powering up the device. This will ensure that it works correctly and does not cause any damage to your Blink Outdoor Camera.

5. Battery Maintenance:

Make sure to keep track of your battery life, as well as check for any corrosion or damage. This will help ensure that your Blink Outdoor Camera battery is always ready to go when needed.

By following these considerations when replacing the battery of your Blink Outdoor Camera, you can help to ensure that it works correctly and has a long life. Keeping track of the battery life and checking for any damage or corrosion will also help to keep your device functioning properly.

Some Tips and Tricks to Replace Blink Outdoor Camera Battery

  1. Make sure to turn off the power before starting to replace your Blink Outdoor Camera Battery. It’s important to do this in order to ensure that no harm is caused to the camera, or yourself, during the battery replacement process.
  2. When you start replacing the battery, it’s important to ensure it is compatible with your Blink Outdoor Camera. Check the back of the camera for a sticker indicating the battery type and size required.
  3. Before beginning to unscrew the battery compartment, ensure you have everything you need ready: a suitable new replacement battery, an appropriate screwdriver or other tools, some cotton swabs, and rubbing alcohol.
  4. Carefully unscrew the battery compartment, taking care not to cross thread or strip the screws. Place them in a safe place so that you won’t lose them during the replacement process.
  5. Once the battery compartment is open, use the cotton swab and some rubbing alcohol to clean all the contacts carefully. This will help ensure a better connection and long battery life.
  6. Carefully insert the new replacement battery, ensuring it is correctly oriented before tightening the screws to secure it.
  7. After successfully replacing your Blink Outdoor Camera Battery, you’ll want to make sure that everything is working properly. Turn the power back on and test the camera out to make sure it’s functioning normally.
Make Sure That Everything is Working Properly

With these tips and tricks, you should be able to successfully replace your Blink Outdoor Camera Battery without any hassle or worry. While it might seem intimidating at first, following these steps will ensure a smooth and successful battery replacement. Good luck!

Frequently Asked Questions

Which Type of Battery Will Be Better for My Blink Outdoor Camera:

The best type of battery to use for your Blink Outdoor Camera is an alkaline battery. Alkaline batteries are generally considered the best choice for powering devices like cameras since they last longer and provide more consistent power over time. 

Lithium-ion batteries can also work, but they tend to drain faster and may require more frequent replacements. Ultimately, the choice between alkaline and lithium-ion batteries is up to you and your preference. When selecting a battery for your Blink Outdoor Camera, you should also consider other factors such as cost, size, and availability.

How Often Should I Replace My Battery?

Replacing the battery in your Blink Outdoor Camera is typically recommended once every six months. This is a good rule of thumb, but it may vary depending on how much you use your camera and the type of battery you’re using. 

If the batteries seem to last longer than six months, then you can continue using them until they need replacing. On the other hand, if the batteries start running out of power more quickly than normal, then you should replace them sooner rather than later.

What Are Some Best Practices For Caring for My Camera Battery?

The best way to care for your camera battery is to make sure that it’s stored properly when not in use. Make sure that the batteries are not left in direct sunlight or extreme temperatures, and avoid exposing them to moisture. 

Additionally, you should always clean dirty battery contacts with a cotton swab and rubbing alcohol before inserting them into your camera. If you follow these tips, then your camera’s battery should last longer and provide more reliable power over time.

Do I Need to Dispose of My Used Batteries in a Special Way?

Yes, it’s important to dispose of used batteries properly. Be sure to bring your old batteries to a designated recycling center or store for proper disposal. Do not place them in the garbage, as this can be dangerous and potentially damaging to the environment.

Important to Dispose of Used Batteries Properly


Replacing an outdoor camera battery may seem intimidating, but it doesn’t have to be. By following the steps outlined in this blog post, consumers can easily understand how to replace blink outdoor camera battery. Take time to research options and plan ahead to have all the tools you need. Remember that Nest and Arlo use rechargeable batteries instead of replaceable ones, so always check your model before proceeding.

If all else fails, customer service is available to help guide you through the process if needed. Whether purchasing new hardware or addressing a password problem, replacing Blink outdoor camera batteries is within anyone’s reach and knowledge base. And who knows, you might even find you enjoy trying out new tools and tackling tech tasks!

You Can Check It Out to Use Brinks Home Security

Leave a Comment