How to Take Blink Camera Off Mount

Do you have a Blink Camera installed on your property and want to take it off its mount? You may change its location or need to reset the camera for technical reasons. Whatever your reason, learning how to take Blink Camera off mount is important in order to do so safely and without damaging the device.

How to Take Blink Camera Off Mount

This blog post will guide you through all the steps necessary for removing your Blink Camera correctly – from simple setup instructions to connecting it back onto its mount. So if you’re ready, let’s get started!

What Materials Will You Need to Take Blink Camera Off Mount ?

  1. Screwdriver
  2. Step ladder (optional)
  3. Small flathead screwdriver

Step-by-Step Guidelines on How to Take Blink Camera Off Mount

Step 1: Determine the Reason

Before attempting to take the camera off its mount, you should determine the reason for doing so. For instance, if you want to change its location, it is important to decide where you want to place the camera before taking it off its mount, as this will make setup easier later on. You may need to take the camera off its mount and reset it for a different reason.

Step 2: Gather Materials

Once you have determined the reason for taking your Blink Camera off the mount, it is time to gather the materials you’ll need. These include a screwdriver, a step ladder (optional), and a small flathead screwdriver. Before starting, make sure you have all the materials you need to hand in.

Step 3: Unscrew Mount

The next step is to unscrew the mount from the wall using your screwdriver. Make sure to use the appropriate screwdriver head size, as using one that is too large can damage the mount. Unscrewing is the most time-consuming part of the process, so go slowly and carefully. Once you unscrew the mount, remove it from the wall.

Step 4: Remove the Camera from Mount

Remove Your Blink Camera

Now that you have unscrewed the mount, you can remove your Blink Camera from its mount. To do this, loosen the screws on either side of the camera and pull it off gently. Do not force the camera off, as this can damage the device. Remove carefully and set aside.

Step 5: Reconnect to New Mount

If you are moving your Blink Camera to a new location, you must connect it back onto its mount. Before doing so, make sure that the new mount is securely attached to your desired area, and use the appropriate screwdriver size to make sure that it is firmly connected.

Step 6: Re-Attach Camera

Now you can re-attach your Blink Camera back onto its mount. Make sure to tighten the screws on either side of the camera so that it is securely attached and won’t come off easily. You should now be able to use your Blink Camera as normal.

We hope this blog post was helpful in teaching you how to take your Blink Camera off the mount safely and without damaging the device. If you have any questions or concerns, please feel free to contact our support team for assistance. Thanks for reading!

Some Other Tips and Tricks to Take Blink Camera Off Mount

  1. Make sure you press the power button to turn off your camera before un-mounting it.
  2. Be careful with the cords and cables when un-mounting the Blink camera. Pull gently and slowly to avoid damage or breakage.
  3. If the mount is stuck on a surface, use an anti-static lubricant to help you remove it.
  4. If you have difficulty removing the mount, try using a rubber mallet to gently tap the sides of the mount until it comes loose.
  5. Finally, make sure that all parts are securely fastened before putting your camera back on its mount. It is important to ensure that everything is properly secured to avoid damage or breakage.
  6. With proper care and attention, you can safely take your Blink camera off the mount and make sure it lasts for a long time.
Careful With the Cords and Cables

With these tips and tricks, you can safely and easily take your Blink camera off its mount. Follow these instructions to ensure that your camera is properly un-mounted, so it lasts for a long time!

Things You Will Need to Consider While Taking Blink Camera of Mount

1. Safety:

When taking off the mount, always be mindful of your safety and that of others in the area as well. Remember that you might be handling a heavy device, so make sure to use appropriate lifting techniques to avoid accidents or injuries.

2. Power Disconnect:

Before taking off the mount, it is important first to disconnect the power from the Blink camera. This will help ensure that no damage is caused and will prevent any electrical shock risks.

3. Proper Tools:

Make sure you are using the right tools for taking off the mount, such as a Phillips screwdriver or other tools designed for this type of job. Using the wrong tools could damage the mount, making removing it more difficult.

4. Detaching Mount:

Once you have successfully disconnected the power from the Blink camera and gathered your tools, you can start detaching the mount from its base. Start by unscrewing all screws that hold the mount in place. Once removed, carefully lift off the mount from its base.

5. Final Tips:

Clean Up Any Debris

Finally, when you are done removing the mount, clean up any debris that may have been created during the process. This will ensure that no damage is caused to your camera or to the surrounding areas. Also, double-check that all screws and other parts are safely stored away for future use. With these tips, you are ready to remove your Blink camera from the mount!

With these considerations and tips, you are now prepared to take your Blink Camera off its mount safely and securely. So go ahead and get started! With the right tools and safety precautions in place, you should be able to remove the mount without any issues. Good luck!

Some Common Reasons for Taking Blink Camera Off Mount

1. To loan the Blink Camera to other family members:

Sometimes, you might need to temporarily lend your Blink camera to a family member or friend who also owns and uses a Blink system. This allows them to add an extra camera to their own setup and benefit from any additional surveillance around their home or property.

2. Change the angle of the lens for better coverage:

You can adjust the angle by taking the camera off its mount to get an even wider field of view. This is helpful when you need to see a larger area than what was captured by the original mounting position.

3. Move it to another location:

If there’s a specific area in your home that needs monitoring and you don’t have a mount for the camera there, taking it off its mount and moving it to an alternate location is a simple solution. This also means you can move the camera around if needed when different areas of your home require more protection or surveillance.

4. To upgrade from one Blink model to another:

If you have an older Blink camera that needs to be upgraded, taking it off its mount is the first step towards doing so. This will allow you to replace the old version with a newer model that offers more features or better video quality.

5. To clean the lens and surrounding area:

Taking a Blink camera off its mount gives you the opportunity to clean the lens and surrounding area of dust, dirt, and debris. This is important for ensuring the best possible viewing experience and making sure that the images captured by the camera are clear and sharp.

These are the most common reasons for taking your Blink camera off its mount, but you may come across other situations where removing the camera is necessary. If so, follow the instructions in your Blink user manual for safe removal and reattachment of the device.

Gives You the Opportunity to Clean the Lens


Mounting your Blink Camera can be an easy and rewarding experience. You’ll have peace of mind in understanding that your camera is securely mounted, plus you’ll also feel proud that you were able to use some simple tools and steps to do it yourself.

As we covered today, make sure you wear eye protection and pay close attention to the surface where you are mounting the camera – if necessary, use a stud finder to ensure you find a solid mount on the wall or ceiling.

Then gather the tools needed– a drill and anchor screws – and create holes in which your screws will fit perfectly. After screwing them into place with a drill, simply attach your Blink Camera to ensure it is properly aligned before tightening its mount into place. And there you have it! Congratulations! Now you know how to take blink camera off mount – mission accomplished!

Leave a Comment