Have you ever forgotten your Tru Bolt lock code? It can be frustrating when you can’t remember the code and even more frustrating when you can’t get into your house. Luckily, there is an easy way to reset the code. This blog post will show you how to reset tru bolt lock code. Keep reading for instructions.
What Is a Tru Bolt Lock?
A Tru Bolt lock is a type of door lock that uses a keypad for entry. The keypad has a series of numbers you must enter to unlock the door. If you forget the code, or if someone changes the code without your knowledge, you can be locked out of your home. Tru Bolt locks are often used on homes with multiple occupants, such as apartments or condos. That way, each person can have their own code, and you don’t have to worry about losing your keys.
What Causes Tru Bolt Lock Codes Need to Be Reset?
You might need to reset your Tru Bolt lock code for several reasons. Maybe you forgot the code and can’t get into your house. Or, someone may have changed the code without your permission. If you have multiple people living in your home, it’s possible that one of them changed the code and didn’t tell you. Whatever the reason, you’ll need to reset the code if you can’t get into your house. The good news is that it’s easy to do and only takes a few minutes.
Step by Step How to Reset Tru Bolt Lock Code
1. Finding the Reset Button
The first thing you need to do is find the reset button. The reset button is usually located on the back or bottom of the lock. It will be a small button that you can press with your finger. Consult your owner’s manual if you can’t find the reset button.
2. Press and Hold the Reset Button
Once you’ve found the reset button, press and hold it for a few seconds, you might need to use a paperclip or something similar to press the button. If the reset button is recessed, you need to insert something small like a paperclip or toothpick into the hole and press and hold the button.
After a few seconds, you should hear the lock beep, and the red light will turn green. This means that the reset was successful, and you can now enter a new four-digit code.
3. Entering a New Code
Now that the lock has been reset, you can enter a new code. The code can be any four-digit combination that you choose. Once you’ve chosen a code, enter it into the keypad and press the “#” button. The lock will beep, and the green light will turn on, indicating that the new code has been accepted. If you make a mistake while entering the code, start over from the beginning.
4. Test the New Code
Now that you’ve reset the code, it’s time to test it out. Try entering the new code into the lock and see if it opens. If it does, then you’re all set! If not, make sure that you’re entering the code correctly. Remember, the code is case-sensitive, so be sure to enter it exactly as you did when you set it.
5. Changing the Code
If you ever need to change the code, follow the same steps above. Enter the old code, press the reset button, enter the new code, and press “#.” The new code will be accepted, and you can start using it right away.
6. Tips for Choosing a Code
When you’re choosing a new code, there are a few things to keep in mind. First, avoid using easily guessed numbers like 1234 or 0000. Second, don’t use codes that are easy to guess, like your birthday or your address. Third, avoid using codes that are easy to guess, like your birthday or your address. Fourth, ensure that the code is something you can remember easily. You don’t want to reset it again because you forgot it.
Some Effective Ways on How to Reset Tru Bolt Lock Code
1. Use a Paperclip
One of the easiest ways to reset your Tru Bolt lock code is to use a paperclip. To do this, insert the paperclip into the hole located on the back of the lock. Once you feel resistance, turn the paperclip clockwise until you hear a click. This will reset your lock code to the factory default.
2. Use a Small Pin or Needle
If you don’t have a paperclip on hand, you can also use a small pin or needle to reset your lock code. First, insert the pin or needle into the tiny hole on the back of the lock. Next, turn the knob to the left until you hear a click. Finally, enter your new four-digit code and turn the knob to the right. Make sure to test out your new code before you close the lock.
3. Use a Toothpick
If you can’t find the reset button, there’s another way to reset the code on your Tru Bolt lock. You’ll need a toothpick for this method. First, insert the toothpick into the keyhole. Then, turn the lock to the right until you hear a click. Continue turning the lock until it won’t turn anymore. Finally, remove the toothpick and enter your new code.
4. Use a Bobby Pin
You can also use a bobby pin if you don’t have a toothpick. This method is a little harder, but it will still work if you’re patient. First, insert the bobby pin into the bottom of the keyhole. Then, use your other hand to apply pressure to the top of the bobby pin. You should feel the bobby pin start to engage the pins inside the lock. Slowly apply pressure and turn the bobby pin until you feel the pins start to line up. Once they’re lined up, you can remove the bobby pin and turn the knob to unlock the door.
5. Use a Safety Pin
A safety pin is also a small object which can be used to reset your Tru Bolt lock code. To do this, insert the safety pin into the hole located at the bottom of the keypad. Once you feel the pin touch the reset button, hold it down for about 3 seconds. After that, your lock code will be reset, and you can enter a new one.
6. Use a Hairpin
You can also use a hairpin if you don’t have a safety pin. This method is a bit more difficult, but it will still work. First, straighten out the hairpin. Then, insert the hairpin into the hole in the back of the knob. You will feel it catch on to something. Now, twist the hairpin until you hear a click. This means that the knob has been reset.
7. Use a Pen
If you don’t have a safety pin or a hairpin, you can also use a pen to reset your Tru Bolt lock code. First, find a small pen to fit into the keyhole. Next, insert the pen into the keyhole and turn it clockwise. The pen will push the reset button inside the lock and reset the code. Pencils will not work for this method, so make sure to use a pen.
8. Use a Nail File
You can also use a nail file if you don’t have a pen. First, find a nail file that is small enough to fit into the keyhole. Next, insert the nail file into the keyhole and turn it clockwise until you hear a click. Finally, remove the nail file, and your lock should be reset.
9. Hire a Locksmith
If you can’t reset the code on your own, you can always hire a locksmith. Locksmiths are trained professionals who can help you reset your code and get your lock working again. Be sure to find a reputable locksmith who is familiar with Tru Bolt locks. You can search for local locksmiths online or in the Yellow Pages. Once you find a locksmith, be sure to ask for references and read online reviews before hiring anyone.
10. Contact Customer Service
You can always contact customer service if you’re still having trouble resetting your Tru Bolt lock code. Customer service representatives can help you through the process and ensure that your lock is working properly.
Some Precautions on How to Reset Tru Bolt Lock Code
1. Do not attempt to reset the code on your Tru Bolt lock if you do not know what you are doing. This could damage the lock and render it useless.
2. Be sure to write down the new code in a safe place so that you will not forget it.
3. Do not share the new code with anyone you do not want access to your home.
Conclusion
So there you have everything you need to know about how to reset tru bolt lock code. Be sure to follow the instructions carefully, and do not attempt to reset the code if you do not know what you are doing. If you’re still having trouble, you can always contact customer service or hire a locksmith. Thanks for reading, and we hope this article was helpful!
You Can Check it Out to Change a Wordlock Combination